You may also like
Screw 10 x 1-1/2 PN SD-PH TS D-Pt2 S (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKS19 – Frequently Asked Questions
1) Do I need to drill a pilot hole before driving these #10 self-drilling screws into sheet metal?
No. The number 2 drill point on the JTEKS19 cuts its own hole in sheet metal and light gauge steel as you drive it, then the threads take hold. That's the whole reason to use a self-drilling (Tek style) screw instead of a sheet metal screw, which does need a pre-drilled hole in anything but the thinnest stock.
2) What is the Metallics part number to order for a #10 x 1-1/2 self-drilling pan head screw?
Order Metallics JTEKS19. That's the manufacturer part number for the #10 x 1-1/2 inch pan head Phillips self-drilling screw in the 100 count jar.
3) What kind of jobs is the Metallics JTEKS19 #10 x 1-1/2 screw used for?
It's an electrical trade fastener, stocked under Metallics' electrical supplies line. The 1-1/2 inch length under a pan head suits mounting boxes, straps, brackets, and device plates to studs or sheet metal where you need some reach through a surface layer before biting the substrate. The pan head sits broad and low, so it bears on a strap or bracket flange without needing a washer.
4) Is the JTEKS19 a Phillips or square drive screw?
Phillips. The JTEKS19 takes a Phillips driver, typically a #2 bit for a #10 screw, so if your crew is set up with square drive bits you'll want to carry a Phillips tip for these.
How fast can I get the Metallics JTEKS19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKS19 come with a warranty?
Absolutely. The Metallics JTEKS19 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKS19?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKS19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.