You may also like
Screw 10 x 1-1/4 PN SD-PH TS D-Pt2 S (Jar 500)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKS15V – Frequently Asked Questions
1) What size and type of screw is the Metallics JTEKS15V?
The JTEKS15V is a #10 x 1-1/4 inch self-drilling pan head Phillips sheet metal screw with a type 2 drill point. It ships as a jar of 500 pieces.
2) Do I need to pre-drill a pilot hole for the Metallics #10 x 1-1/4 self-drilling screw?
No. The JTEKS15V has a self-drilling drill point, so it cuts its own hole in sheet metal as it is driven. That is the point of the type 2 drill tip, and it is why these get used for fastening strut, boxes, brackets and raceway to metal studs or light-gauge steel without a separate drilling step.
3) Is a #10 x 1-1/4 inch pan head self-drilling screw the right length for mounting boxes to metal studs?
At 1-1/4 inches of overall length, the JTEKS15V gives you enough reach to pass through a bracket, box ear or strut flange and still bite the stud. If you are only fastening thin sheet to thin sheet, a shorter screw is less likely to leave a sharp tail projecting behind the stud, which matters when wire is pulled past it.
4) Does the pan head on this Metallics screw sit flush or proud of the surface?
Proud. A pan head sits on top of the material with a flat bearing underside, so it clamps sheet metal and brackets rather than countersinking. If you need the head below the surface, you want a flat or trim head screw instead, not the JTEKS15V.
5) What driver bit do I need for the Metallics JTEKS15V screw?
A Phillips bit. The JTEKS15V is a pan head Phillips, so no hex or square driver is required. On a #10 body a #2 Phillips is the usual fit.
6) How are Metallics JTEKS15V screws packaged for a service van or shop bin?
They come 500 to a jar, which is the format most electricians keep on the truck. The jar reseals, so partial counts stay contained rather than spilling loose in a bin.
How fast can I get the Metallics JTEKS15V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKS15V come with a warranty?
Absolutely. The Metallics JTEKS15V is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKS15V?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKS15V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.