You may also like
Screw 10 x 1/2 PN SD-PH TS D-Pt2 St- (Jar 500)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKS5V – Frequently Asked Questions
1) What size and head style is the Metallics JTEKS5V self-drilling screw?
The JTEKS5V is a #10 x 1/2 inch pan head Phillips self-drilling screw with a #2 drill point, in steel. The pan head sits low and broad, so it seats flat against sheet metal, strut clips, and box ears without the countersink a flat head would need.
2) Do I need to pre-drill a pilot hole for these #10 self-drilling TEK screws?
No. The JTEKS5V carries a #2 self-drilling point, which cuts its own hole and taps the thread in one pass, so an electrician running conduit straps or boxes into light-gauge steel can drive straight off the screw gun. A #2 point is for thin to medium gauge steel; heavier structural steel needs a higher-numbered point.
3) How many screws come in a jar of Metallics JTEKS5V?
Each jar holds 500 of the #10 x 1/2 inch self-drilling screws. The jar pack suits a van stock or shop bin for MRO and rough-in work where you are pulling screws by the handful rather than opening a new box each time.
4) Are these Metallics TEK screws made of stainless or plain steel?
Steel. The JTEKS5V is a steel self-drilling screw, which is the normal choice for interior electrical work. For wet locations or corrosive exterior environments, specify a stainless or coated fastener instead.
5) What are #10 x 1/2 inch self-drilling pan head screws typically used for on an electrical job?
Half an inch of length is a short fastener, so the JTEKS5V is for attaching thin material to thin material: conduit straps and one-hole clamps to metal studs, device boxes and plates to steel framing, cover panels, and channel accessories. If you need to pull through two layers plus a strap base, step up in length rather than relying on a 1/2 inch screw.
How fast can I get the Metallics JTEKS5V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKS5V come with a warranty?
Absolutely. The Metallics JTEKS5V is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKS5V?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKS5V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.