You may also like
Screw 10 x 3/4 PN SD-PH TS D-Pt2 St- (Jar 500)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKS6V – Frequently Asked Questions
1) What size screw is the Metallics JTEKS6V, and how many come in a jar?
It's a #10 x 3/4 inch screw, packaged 500 to a jar rather than loose in a box. That size is short enough for fastening through sheet metal, straps, and device brackets without the point running long out the back side.
2) Does the Metallics JTEKS6V self-drill, or do I have to pre-drill a pilot hole?
No pilot hole needed. The JTEKS6V is a self-drilling screw with a #2 drill point, so it cuts its own hole in sheet metal as you drive it. That's the point of a TEK style fastener on electrical work, you go straight in with a driver.
3) What driver bit do I need for the Metallics JTEKS6V self-drilling screws?
A Phillips bit. These are pan head Phillips screws, so a standard #2 Phillips driver bit in an impact or drill handles them. The pan head sits low and broad, which keeps a strap or bracket pulled flat instead of pulling into the hole the way a flat head would.
4) Will a 3/4 inch self-drilling screw be long enough for my application?
Three quarters of an inch gives you very little grip past thin material, so the JTEKS6V suits sheet metal, straps, and bracket work where the total stack is thin. If you're fastening through a thicker assembly, through furring plus steel, or through a backing plate, go to a longer length instead. Short self-drillers are chosen deliberately so the point doesn't protrude where it can snag wire.
5) Are these Metallics screws steel, and what are electricians using them for?
Steel construction, sold as an electrical fastener. Typical use is anchoring into sheet metal: mounting straps and clamps, securing device rings, fastening to studs and enclosures, and panel and raceway work where a self-drilling screw saves a drilling step.
How fast can I get the Metallics JTEKS6V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKS6V come with a warranty?
Absolutely. The Metallics JTEKS6V is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKS6V?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKS6V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.