You may also like
Screw 8 x 3/4 PN SD-PH TS D-Pt2 St-Z (Jar 500)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKS2V – Frequently Asked Questions
1) Do I need to pre-drill a pilot hole for the Metallics JTEKS2V screws?
No. The JTEKS2V is a self-drilling screw with a Type 2 drill point, so the point cuts its own hole as you drive it into sheet metal. Pre-drilling isn't required for the gauges a #8 self-drilling TEK-style point is intended for.
2) How many Metallics JTEKS2V screws come in a jar?
500 screws per jar. The JTEKS2V is packaged in a jar rather than a box, which is the handier format for a van or a gang box where you're pulling a handful at a time for strut, device boxes, and sheet metal work.
3) Are the Metallics JTEKS2V screws okay for outdoor or damp locations?
These are zinc-plated steel, which is a general indoor/dry-location plating. Zinc plating gives light corrosion resistance but it isn't stainless, so for exterior, wet, or corrosive environments choose a stainless self-drilling screw instead.
4) Will a pan head screw sit flush, or do I need a flat head?
A pan head sits on top of the surface with a low rounded crown, not flush. The JTEKS2V is a pan head, so use it where a raised head is acceptable, such as fastening strut accessories, box covers, or sheet metal laps. If the application requires the head buried in a countersunk hole, you want a flat head screw instead.
5) What driver bit do I need for the Metallics JTEKS2V self-drilling screw?
A Phillips bit. The JTEKS2V has a Phillips recess in a pan head, so a #2 Phillips is the usual fit for a #8 screw. No hex or square driver needed.
How fast can I get the Metallics JTEKS2V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKS2V come with a warranty?
Absolutely. The Metallics JTEKS2V is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKS2V?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKS2V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.