You may also like
Screw 8 x 1/2 PN SD-PH TS D-Pt2 St-Z (Jar 500)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKS1V – Frequently Asked Questions
1) What size and head type is the Metallics JTEKS1V self-drilling screw?
The JTEKS1V is a #8 by 1/2 inch pan head Phillips self-drilling screw with a #2 drill point, in zinc-plated steel. The short 1/2 inch length is typical for fastening into light-gauge metal where you don't want the point protruding far behind the work.
2) Do I need to pre-drill for these #8 x 1/2 TEK screws?
No. The screw carries a #2 self-drilling drill point, so it cuts its own hole in sheet metal and light-gauge steel as it drives. One pass with a Phillips bit, no pilot hole.
3) How many screws come in a jar of Metallics JTEKS1V?
500 screws per jar. Metallics packages this one in a jar rather than a box, which is the handier pack for a van shelf or a bench since you can scoop a handful without spilling the lot.
4) Are these zinc-plated screws OK for outdoor or wet locations?
These are zinc-plated steel, which is a dry-location, indoor-grade finish. For exterior strut, rooftop work, or anywhere persistently damp, step up to a stainless or a coated exterior-rated self-driller instead.
5) What driver bit do I need for the JTEKS1V screw?
A Phillips bit. For a #8 pan head, that is a #2 Phillips, which is the bit already in most installers' impact driver.
How fast can I get the Metallics JTEKS1V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKS1V come with a warranty?
Absolutely. The Metallics JTEKS1V is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKS1V?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKS1V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.