You may also like
Screw 10 x 3/4 PN SD-PH TS D-Pt2 St- (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKS6 – Frequently Asked Questions
1) Do I need to pre-drill for the Metallics JTEKS6 screw?
No. It's a self-drilling screw with a point 2 drill tip, so it cuts its own hole in light-gauge steel as you drive it. No pilot hole, no separate step. In wood or masonry it isn't the right fastener.
2) What driver bit does the JTEKS6 take?
Phillips. The head is a pan head with a Phillips recess, so a standard Phillips bit in a screwgun or impact driver drives it. The pan head sits low and broad, which is what you want when the screw is bearing on a strap or a bracket flange rather than countersinking.
3) Is the JTEKS6 screw stainless or plain steel? Can I use it outdoors?
It's a steel screw, not stainless. For interior electrical work, panel and strap fastening, dry mechanical rooms, that's fine. If the fastener will see weather, washdown or a corrosive atmosphere, specify a stainless or coated self-drilling screw instead.
4) What is the part number to order the Metallics #10 x 3/4 pan head self-drilling screw?
Order Metallics JTEKS6. That's the manufacturer part number for the #10 x 3/4 inch pan head Phillips self-drilling steel screw in the 100-count jar.
5) Are these self-drilling screws meant for electrical work or general construction?
Metallics catalogues the JTEKS6 as an electrical fastener, and that's the usual use: mounting straps, clips, boxes, enclosures and device plates to light-gauge steel studs and channel. Nothing stops you using it anywhere a self-drilling pan head screw suits, but the jar of 100 is sized for an electrician's truck stock rather than a framing crew.
How fast can I get the Metallics JTEKS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKS6 come with a warranty?
Absolutely. The Metallics JTEKS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.