You may also like
Screw 10 x 1 IHW 5/16Hd Combo S-Pt T (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JQK530 – Frequently Asked Questions
1) Do I need to pre-drill for the Metallics JQK530 screw?
No. The JQK530 is a sharp point (S-Pt) screw with a type T thread, so it starts and cuts its own hole in wood, plastic and sheet material without a pilot hole. For heavier steel you would want a self-drilling point screw instead.
2) How many Metallics JQK530 screws come in a jar?
The JQK530 ships as a jar of 100 screws. Jar packaging is the standard pack type for this item, which is how electrical fastener assortments are typically stocked on a van or a shop shelf.
3) Can I drive the JQK530 with a 5/16 hex nut driver, or do I need a Phillips bit?
Either works. The head is a 5/16 inch indented hex washer with a combo drive, meaning the hex is sized for a 5/16 nut driver and the recess in the top takes a bit as well. Most installers run them with a 5/16 magnetic nut setter and keep the recess as a backup when the head is in a tight spot.
4) What is this #10 x 1 hex washer head screw typically used for on an electrical job?
It is an electrical-trade fastener, used for mounting boxes, straps, clamps, enclosures, raceway and device plates to wood framing or light sheet material. The indented hex washer head gives a broad bearing surface so it will not pull through a thin bracket or box flange, and the 1 inch length is short enough to stay inside a nominal stud without blowing through.
How fast can I get the Metallics JQK530 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JQK530 come with a warranty?
Absolutely. The Metallics JQK530 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JQK530?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JQK530 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.