You may also like
Screw 1/4-20 x 1-1/4 SHCS St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSHCZ14114 – Frequently Asked Questions
1) What size and thread is the Metallics JSHCZ14114 socket head cap screw?
It's a 1/4-20 x 1-1/4 inch socket head cap screw. The 1/4-20 means a 1/4 inch nominal diameter with 20 threads per inch (coarse UNC), and 1-1/4 inches is the shank length under the head. Driven with a hex key, not a screwdriver.
2) How many screws come in a jar of Metallics JSHCZ14114?
One hundred screws per jar. Metallics packs these in a jar rather than a box, which keeps the loose hardware contained on a service truck or in a parts bin.
3) Are these 1/4-20 socket head cap screws zinc plated for corrosion resistance?
Yes. The JSHCZ14114 is steel with a zinc plating ('St-Zn'). That's a general-purpose indoor and protected-location finish. For continuous wet exposure, washdown areas, or exterior coastal work, specify stainless rather than zinc plated steel.
4) Why use a socket head cap screw instead of a hex bolt on an electrical install?
The socket head takes a hex key straight down into the head, so you can tighten in a tight enclosure or against a wall where there's no room to swing a wrench, and the cylindrical head sits in a counterbored hole flush or near-flush. A hex bolt needs side clearance for the wrench. For the JSHCZ14114 specifically, the 1/4-20 thread and 1-1/4 inch length cover typical panel, bracket, and channel fastening.
5) Do nuts or washers come with the Metallics JSHCZ14114 jar?
No. The jar holds 100 screws only. If you're fastening through to a nut rather than into a tapped hole, order 1/4-20 nuts and 1/4 inch washers separately.
6) What hex key size do I need to drive the JSHCZ14114?
Standard socket head cap screws in 1/4-20 take a 3/16 inch hex key. No separate driver bit style to match, which is why these get used where a Phillips head would cam out under torque.
How fast can I get the Metallics JSHCZ14114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHCZ14114 come with a warranty?
Absolutely. The Metallics JSHCZ14114 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHCZ14114?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHCZ14114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.