You may also like
Screw M5 x 35MM PN PH MS 18-8 SS (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JMPMP535SS – Frequently Asked Questions
1) Are these Metallics M5 screws stainless, and will they hold up outdoors or in damp areas?
They're 18-8 stainless, the common 300-series austenitic grade used for general corrosion resistance. That handles damp indoor locations, washdown areas and ordinary outdoor exposure well. For saltwater or chemical exposure, a 316 stainless fastener is the better choice.
2) How many screws come in the Metallics JMPMP535SS pack?
100 screws, packed in a jar rather than a loose bag or bulk box. The jar is useful on a service van or a shop bench where you want the count to stay intact between jobs.
3) Is a pan head Phillips the right screw for mounting devices in an electrical enclosure?
Yes for through-hole and tapped-hole mounting work. A pan head seats flat on the surface with a broad bearing face, so it suits mounting plates, brackets, covers and device hardware where you have no countersink. If the drawing calls for a flush surface, you need a flat head in a countersunk hole instead; if you need a low-profile head under a tight cover, a truss or binder head is the alternative.
4) Do these M5 screws come with nuts or washers?
No. The jar holds 100 screws only. Machine screws in a tapped hole need nothing else, but for a through-bolted joint you'll need to order M5 nuts and M5 washers separately, and match them in 18-8 stainless so the whole joint has the same corrosion resistance.
5) Can I use these stainless machine screws with aluminum enclosures without galvanic problems?
18-8 stainless against aluminum is a dissimilar-metal pair, so in wet or outdoor service the aluminum is the metal that sacrifices. Dry indoor enclosures are a non-issue in practice. Where the joint sees weather, isolate with a nylon washer or use an anti-seize compound on the threads.
6) What is the Metallics part number to order for M5 x 35mm stainless pan head screws?
Order part number JMPMP535SS from Metallics. That number covers the full jar of 100 M5 x 35mm pan head Phillips machine screws in 18-8 stainless.
How fast can I get the Metallics JMPMP535SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP535SS come with a warranty?
Absolutely. The Metallics JMPMP535SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP535SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP535SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.