You may also like
Screw M6 x 16 FH PH MS St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JMFMP616 – Frequently Asked Questions
1) What size and type of screw is the Metallics JMFMP616?
It's an M6 x 16 machine screw with a flat head and a Phillips drive, made of steel with a zinc plating. The 16 is the length in millimeters, so you get a 6mm metric thread running 16mm. Flat head means it seats flush in a countersunk hole rather than standing proud.
2) Will an M6 x 16 machine screw thread into a standard metric electrical box or enclosure?
Machine screws like this carry a straight, uniform metric thread, so they mate with an M6 tapped hole or an M6 nut, not with sheet metal or wood. If the enclosure, device bracket or panel you're mounting to has M6 tapped holes or you're running a nut on the back side, this is the right screw. If the hole is untapped, you need a self-tapping or sheet metal screw instead.
3) How many M6 x 16 flat head Phillips machine screws come in a jar?
The JMFMP616 is packaged 100 screws to a jar, which is the standard bench or van quantity for this kind of metric machine screw. The jar keeps them sorted on a service truck rather than loose in a bin.
4) Are zinc plated steel machine screws OK for outdoor or wet electrical work?
The JMFMP616 is zinc plated steel, which is a mild corrosion coating meant for dry indoor use. For exterior, damp or washdown locations, specify stainless steel fasteners instead; zinc plating will eventually rust through in those conditions.
5) Why choose a flat head Phillips screw over a pan head for panel and device mounting?
A flat head sits flush when driven into a countersunk hole, so nothing protrudes to interfere with a cover plate, a door, or a stacked component. A pan head leaves the head sitting on the surface. If your mounting hole isn't countersunk, the flat head won't seat properly and a pan head is the better pick. The JMFMP616 is the flat head Phillips version in M6 x 16.
6) What part number should I order for the Metallics M6 x 16 flat head Phillips screw jar?
Order Metallics part number JMFMP616. That covers the M6 x 16 flat head Phillips steel zinc machine screw in the 100 count jar.
How fast can I get the Metallics JMFMP616 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMFMP616 come with a warranty?
Absolutely. The Metallics JMFMP616 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMFMP616?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMFMP616 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.