You may also like
Screw M6 x 10 FH PH MS St-Zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JMFMP610 – Frequently Asked Questions
1) Is JMFMP610 a machine screw or a self-tapping sheet metal screw?
Machine screw. It needs an existing tapped hole or a nut; it will not cut its own thread in sheet metal. If you're fastening into an untapped hole, you want a self-tapping or sheet metal screw instead, or drill and tap the hole to M6 first.
2) What head and driver does the JMFMP610 screw use?
Flat head with a Phillips recess. The flat head seats flush in a countersunk hole, which is what you want when a cover plate, bracket or trim has to sit tight against the surface. Driven with a standard Phillips bit.
3) Is the JMFMP610 screw plated for corrosion resistance, and can I use it outdoors?
The screw is steel with a zinc plating. Zinc plate handles dry indoor and protected locations fine. For wet, outdoor or corrosive environments, step up to stainless rather than zinc-plated steel.
4) Will this M6 machine screw work for mounting devices and covers in electrical boxes and panels?
That's what it's stocked for. The JMFMP610 is an electrical fastener, and an M6 x 10 flat head Phillips machine screw is the sort used to mount plates, brackets and devices into metric-tapped enclosures and panel hardware. Check that the hole in your enclosure is actually M6 tapped and that 10 mm gives you enough thread engagement past the material you're clamping.
5) How many Metallics JMFMP610 screws come in a pack?
They ship 100 to a jar. The jar pack is handy on a service van or in a shop bin, since you can pour out a handful without the screws scattering the way a loose bag lets them.
6) What is the Metallics part number for the M6 x 10 flat head Phillips zinc machine screw?
JMFMP610 is the Metallics part number, and it's the number to order by. It covers the M6 x 10 flat head Phillips steel zinc machine screw in the 100-count jar.
How fast can I get the Metallics JMFMP610 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMFMP610 come with a warranty?
Absolutely. The Metallics JMFMP610 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMFMP610?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMFMP610 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.