You may also like
Screwdriver Bit Hx 1/4" Slotted 10-12 Point 10-12 1-1/2" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics 00010B – Frequently Asked Questions
1) Will the Metallics 00010B slotted bit fit a standard 1/4 inch hex quick-change chuck?
Yes. The 00010B has a 1/4 inch hex shank, so it drops into any 1/4 inch hex quick-change holder, magnetic bit holder, or impact driver collet. Overall bit length is 1-1/2 inches, which is the common insert-bit length rather than a power/extension length.
2) What size slotted screws does the Metallics 00010B bit drive?
It is a slotted bit sized for #10-12 screws, so it matches the slot width and depth on #10 and #12 machine screws, ground screws, and device terminal screws. Smaller slotted screws will let the tip rock in the slot, and larger ones will cam the tip out of the slot.
3) Is the Metallics 00010B sold as a single bit or in a multi-pack?
One bit per pack. The 00010B ships as a single piece in a pouch, so if you are outfitting a crew or want spares in every van, order the quantity you need rather than expecting a set.
4) Is this bit meant for electrical work or general fastening?
Metallics catalogs the 00010B under its electrical line, and the #10-12 slotted tip is the size electricians hit most often: device and receptacle terminal screws, panel ground screws, and slotted machine screws in boxes and enclosures. Nothing about it limits it to electrical work, but that is the fastener range it was sized for.
5) Can I use the Metallics 00010B in an impact driver?
The 1/4 inch hex shank seats in an impact driver collet, so it will physically fit. Keep in mind that slotted tips cam out under impact more readily than Phillips or square drive; for terminal screws most electricians run a drill/driver on a low clutch setting or finish by hand to avoid chewing the slot.
How fast can I get the Metallics 00010B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 00010B come with a warranty?
Absolutely. The Metallics 00010B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 00010B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 00010B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.