You may also like
Screwdriver Pwr Bit Hx 1/4" Slotted 10-12 Point 10-12 2" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics 10010B – Frequently Asked Questions
1) Will the Metallics 10010B bit fit a standard cordless drill or impact driver?
It has a 1/4 inch hex power shank, so it drops into any quick-change bit holder, magnetic bit tip holder, or a standard three-jaw chuck. That is the common shank across cordless drivers, so no adapter is needed.
2) What screw size does the Metallics 10010B slotted power bit drive?
The tip is sized for #10-12 slotted screws, which covers most panel screws, device and cover-plate screws, and slotted terminal screws in that range. For smaller slotted screws such as #6 or #8, the blade will be too wide to seat fully in the slot.
3) Is the 10010B long enough to reach screws inside a deep box or recess?
The bit is 2 inches overall, which is the long power-bit length rather than the 1 inch insert length. That extra reach lets you get into a recessed device box or through a cover without a separate extension holder.
4) How many bits come in a Metallics 10010B order and how is it packaged?
One bit per order, supplied in a pouch. If you are stocking a truck or a shop crib and want spares on hand, order the quantity you need, since each order line is a single piece.
5) Is this a slotted bit or a Phillips bit? I need to be sure before I order.
Slotted (flat blade), not Phillips. Metallics part number 10010B is the slotted #10-12 point in a 2 inch power bit. If your screws take a cross recess, this is the wrong tip.
How fast can I get the Metallics 10010B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 10010B come with a warranty?
Absolutely. The Metallics 10010B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 10010B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 10010B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.