You may also like
Screwdriver Pwr Bit Hx 1/4" Phillips 4-6 Point #1 6" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics 160P1B – Frequently Asked Questions
1) Will the Metallics 160P1B power bit fit a standard 1/4 inch hex quick-change chuck?
Yes. The 160P1B has a 1/4 inch hex shank, so it drops into any quick-change bit holder, impact driver collet, or three-jaw chuck that takes 1/4 inch hex power bits.
2) Do I get one bit or a multi-pack when I order the Metallics 160P1B?
One bit, supplied in a pouch. If you are stocking a van or a maintenance cart and want several on hand, order multiple quantities.
3) Is a #1 Phillips the right bit for device and switch screws, or do I need a #2?
A #1 Phillips covers the smaller screws, around #4 to #6 diameter, which is where you find terminal screws on small devices, fixture hardware, and low-voltage plates. Standard wiring device mounting and cover screws on receptacles and switches are usually #6-32 and take a #2 Phillips, so most electricians carry both. The 160P1B is the #1 size on a 6 inch 1/4 inch hex shank.
4) Can I use the Metallics 160P1B 6 inch Phillips bit in an impact driver?
The 1/4 inch hex shank is the standard power-bit drive, so it seats in impact drivers and cordless screwguns as well as hand bit holders. With a 6 inch bit, keep the tip loaded straight into the screw head; long bits flex and cam out if you drive them at an angle.
How fast can I get the Metallics 160P1B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 160P1B come with a warranty?
Absolutely. The Metallics 160P1B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 160P1B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 160P1B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.