You may also like
Screwdriver Pwr Bit Hx 1/4" Phillips 4-6 Point #1 3" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics 125P1B – Frequently Asked Questions
1) Will the Metallics 125P1B bit fit a standard cordless drill or impact driver?
It has a 1/4 inch hex power shank, which is the standard quick-change size for impact drivers and for any drill chuck that accepts hex bits. Drop it straight into the collet or chuck, no adapter needed.
2) What size Phillips screws does the Metallics 125P1B power bit drive?
It is a #1 Phillips point, which matches the smaller Phillips recesses, typically #4 through #6 screws. For #8 and #10 screws you want a #2 Phillips bit instead.
3) Why use a 3 inch power bit instead of a short 1 inch insert bit?
The 3 inch overall length reaches into device boxes, recessed panels, and deep enclosures where a 1 inch insert bit plus holder would bottom out or wobble. It also drives straight off the tool without a bit holder, so there's one less joint to flex.
4) Is the Metallics 125P1B the right bit for electrical device screws?
It is sold as an electrical fastener accessory and the #1 Phillips point covers the smaller Phillips screws found on device plates, small terminal screws, and light-gauge sheet metal screws. Most receptacle and switch mounting screws and cover plate screws are #2 Phillips, so keep a #2 on the belt as well.
5) How many bits come in the Metallics 125P1B?
One bit per pouch. If you are stocking a van or a crew, order the quantity you need up front, since each pack is a single piece.
How fast can I get the Metallics 125P1B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics 125P1B come with a warranty?
Absolutely. The Metallics 125P1B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics 125P1B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics 125P1B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.