You may also like
Screwdriver Replacement Bit Set
Features
- Fits replaceable-bit screwdrivers and other sockets that accept 1/4''-hex bits.
- These precision-milled bits are 1'' (25 mm) in length and are 1/4'' hex.
- Contains 3/16'' (5 mm) and 9/32'' (7 mm) slotted plus No. 1 and No.2 Phillips tips.
Manufacturer Resources
Product Specs
- Department:
- Electrical
- Product Group:
- Hand Tools
- Product Subgroup:
- Screwdrivers & Drivers
- Product Type:
- Hardware
Klein Tools 70036 – Frequently Asked Questions
1) Will the Klein Tools 70036 bits fit my 1/4-inch hex driver or bit holder?
Yes. The 70036 bits are 1/4 inch hex shank, so they seat in replaceable-bit screwdrivers, 1/4 inch bit holders, and sockets that accept 1/4 inch hex bits. Shank length is 1 inch (25 mm), which is the short insert-bit size rather than a 2 inch power bit, so check that your holder is not expecting a longer bit.
2) What tips come in the Klein 70036 replacement bit set?
Four bits: 3/16 inch (5 mm) slotted, 9/32 inch (7 mm) slotted, No. 1 Phillips and No. 2 Phillips. That covers the two slotted widths and two Phillips sizes an electrician hits most on device screws, cover plates and panel work. No square drive, no Torx, no nut drivers in the set.
3) Are these the right replacement bits for a Klein multi-bit screwdriver?
They are. The 70036 set is sold as replacement bits for replaceable-bit screwdrivers, so it restores a multi-bit handle whose original tips have worn or gone missing. The bits are precision milled, 1 inch long, 1/4 inch hex. Anything that takes a standard 1/4 inch hex insert bit will take them, including 1/4 inch drive sockets made for bits.
4) Will a No. 2 Phillips bit from the Klein 70036 drive standard receptacle and switch screws?
For the Phillips-head screws on devices and cover plates, yes, No. 2 is the common size and it is in the set. But most receptacle and switch terminal screws and cover plate screws are slotted, and that is what the 3/16 inch and 9/32 inch slotted bits are for: the 3/16 inch suits smaller device screws, the 9/32 inch the wider slots on cover plates and panel screws. The set gives you both widths so you are not camming out on an undersized tip.
5) Is the Klein 70036 a full bit set or just the screwdriver tips?
Bits only, four of them, with no handle or driver included. If you need the driver itself you want a replaceable-bit screwdriver to go with them. Order by part number 70036 to get the bit set.
6) What size slotted bits are in the Klein 70036 and will they fit metric screws?
Two slotted widths: 3/16 inch, which the manufacturer also gives as 5 mm, and 9/32 inch, given as 7 mm. So a screw slot specified in metric at 5 mm or 7 mm is covered by the same two bits, no separate metric set needed.
How fast can I get the Klein Tools 70036 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 70036 come with a warranty?
Absolutely. The Klein Tools 70036 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 70036?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 70036 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.