You may also like
Screws 10-24 x 1-1/4 FH Hx Pin TR MS (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics TP114SFC – Frequently Asked Questions
1) What driver do I need for the Metallics TP114SFC screw?
It is a hex pin head, so you need a pin-in-hex (hex pin) tamper-resistant bit sized to the recess. A standard Allen key will not seat because of the center pin, and no slotted or Phillips driver will turn it. Order the matching pin-hex bit along with the screws if your crew does not already carry one.
2) Can I use the Metallics TP114SFC to replace the stock screws on electrical covers to stop tampering?
That is what it is for. Where a 10-24 tapped hole is already there, swapping the factory slotted or combo screw for this pin-hex version means the cover cannot be opened with a common driver. Check that your existing hole is 10-24 and that 1-1/4 inches of thread length suits the stack-up; a longer screw than the hole depth will bottom out before the head pulls tight.
3) Will a flat head 10-24 x 1-1/4 tamper screw sit flush on a cover plate?
A flat head seats flush only in a countersunk hole. If your plate or enclosure has a chamfered screw hole, the TP114SFC will finish flat with the surface. On a flat, non-countersunk hole the head will stand proud, and you want a pan or truss head instead.
4) How many screws come in a box of Metallics TP114SFC?
100 pieces per box. For a job where you are securing a run of covers or plates, figure your fastener count per device and buy by the box rather than the piece.
5) What is the Metallics part number for the 10-24 x 1-1/4 pin hex tamper screw?
TP114SFC is the Metallics part number, sold as a 100 piece box of 10-24 x 1-1/4 flat head pin-hex machine screws.
How fast can I get the Metallics TP114SFC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TP114SFC come with a warranty?
Absolutely. The Metallics TP114SFC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TP114SFC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TP114SFC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.