You may also like
Screws 10-24 x 1/2 FH Hx Pin TR MS 18 (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics TP111SFC – Frequently Asked Questions
1) What driver do I need for the Metallics TP111SFC screws?
These take a hex pin tamper resistant driver, meaning a hex socket with a center pin hole. A standard hex key will not seat because the pin in the middle of the recess blocks it, so order the matching pin hex bit before you get to the job.
2) Can I use the TP111SFC to replace the original 10-24 screws in my device or cover plate?
Yes, as a direct swap where the existing hole is tapped 10-24 and 1/2 inch of thread engagement is enough. Check that the existing seat is countersunk, since this is a flat head; a plate prepped for a pan or round head will leave the flat head standing above the surface.
3) Will a flat head 10-24 x 1/2 tamper resistant screw sit flush in my panel?
It will if the hole is countersunk. The TP111SFC has a flat head, which is a countersunk head that finishes level with the surface; in a plain drilled or punched hole without a chamfer the head will stand proud.
4) Are the Metallics TP111SFC screws suitable for securing electrical covers and plates against tampering?
That is what the hex pin head is for. In public or institutional spaces, a 10-24 tamper resistant machine screw replaces the standard slotted or Phillips screw in a tapped cover or plate so it cannot be removed with a common driver. Metallics catalogs the TP111SFC as electrical fastener stock.
5) How many screws come in a box of Metallics TP111SFC?
Sold 100 pieces per box, which is the practical quantity for a security cover or panel changeout across a building rather than a single device.
6) What is the Metallics part number to order for 10-24 x 1/2 inch hex pin tamper resistant flat head screws?
Order Metallics TP111SFC. That number covers the 10-24 x 1/2 inch flat head hex pin tamper resistant machine screw in the 100 piece box.
How fast can I get the Metallics TP111SFC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TP111SFC come with a warranty?
Absolutely. The Metallics TP111SFC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TP111SFC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TP111SFC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.