You may also like
Metallics FMKP832 Screws 370-Pc 8-32 Fh Ph MS Kit St-zn (Trey 1)
Model: MET-FMKP832
Screws 370-Pc 8-32 Fh Ph MS Kit St-zn (Trey 1)
Kit Components
(100) 3/4, (75) 1, (75) 1-1/4, (50) 1-1/2, (40) 2, (30) 3
Additional Notes
Other sizes and quantities available by request | Hardness...
Metallics
$110.43
$63.97
Metallics FMK832 Screws 370-Pc 8-32 Fh Sl MS Kit St-zn (Trey 1)
Model: MET-FMK832
Screws 370-Pc 8-32 Fh Sl MS Kit St-zn (Trey 1)
Kit Components
(40) 1-1/2 IN Machine Screw
(30) 2 IN Machine Screw
(100) 1/2 IN Machine Screw, (75)3/4 IN Machine Screw
(75) 1 IN Machine Screw, 50 x...
Metallics
$105.66
$75.23
Screws 302-Pc 10 Fh Ph Ws Kit St-zn (Trey 1)
Kit Components
- (86) #10 × 2 IN Flat Head Phillips Wood Screw
- (86) 10 × 1-1/2 IN Flat Head Phillips Wood Screw
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Drive Type:
- Phillips
- Fastener Head Type:
- Flat
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Language Code:
- EN
- Number Of Pieces:
- 302
- Order Minimum Imperial:
- 1
- Order Minimum Uom Imperial:
- EA
- Pack Type:
- Tray
- Product Group:
- Fasteners
- Product Height:
- 1.25 in
- Product Length:
- 8 in
- Product Weight:
- 2.55 lbs
- Product Width:
- 4.62 in
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
- Product Type:
- Wood Screw Kit & Display Case
- Type2:
- Wood Screw Kit & Display Case
- Product Finish:
- Zinc
- Product Details:
- Wood Screw Kit & Display Case
- Product Material:
- Steel
Metallics WSK10 – Frequently Asked Questions
1) What screw sizes are in the Metallics WSK10 wood screw kit?
The WSK10 tray is built around #10 flat head Phillips wood screws in two lengths: 2 inch and 1-1/2 inch, with 86 of each called out. The kit is a 302 piece assortment overall, all steel with a zinc finish.
2) Can I use the screws in this Metallics kit in metal studs or concrete?
No. These are wood screws, with the coarse single lead thread meant for wood, plywood, and blocking. Metal studs need a self drilling or sheet metal screw, and concrete or block needs a masonry anchor or a concrete screw. Use the WSK10 only where you are landing into wood.
3) Will a zinc plated wood screw kit hold up outdoors or in a wet location?
Zinc plating on the WSK10 screws is a general purpose coating for dry interior work, not marine or sustained wet exposure. For an outdoor deck, a damp crawlspace, or anywhere treated lumber is involved, step up to a hot dip galvanized or stainless wood screw instead. Inside a panel room, attic, or finished wall the zinc steel screws are the usual choice.
4) Is the Metallics WSK10 a loose bag of screws or does it come in a tray I can keep on the truck?
It ships as a tray style kit and display case, roughly 8 by 4.62 by 1.25 inches, weighing 2.55 lbs. That footprint drops into a van drawer or a job box and keeps the two lengths separated so you are not digging through a bag on a ladder.
5) What trades is the Metallics WSK10 screw assortment meant for?
Metallics builds this assortment for electrical, plumbing, heating and air conditioning work. Think mounting boxes, straps, hangers, and backer plates to wood studs and blocking. The flat head profile lets the screw sit flush or countersunk into the mounting surface rather than standing proud under a device plate or strap.
6) Does the Metallics WSK10 screw kit meet Buy American or ARRA requirements for a public project?
The WSK10 is flagged compliant for both ARRA and Buy American in the manufacturer's data, which is what a government, school, or healthcare procurement file usually asks for. Country of origin is listed as multiple, so the specific origin can vary by production lot.
7) What driver bit do I need for the Metallics WSK10 screws?
Phillips. All the screws in the WSK10 kit are Phillips drive, so a #2 Phillips bit covers a #10 screw in either the 1-1/2 inch or 2 inch length. No Torx or square bit needed.
8) Do I have to buy the Metallics WSK10 in a case quantity?
No. The minimum is one tray, ordered each, so you can pick up a single 302 piece kit for a truck or a shop bench without committing to a multi-pack.
How fast can I get the Metallics WSK10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics WSK10 come with a warranty?
Absolutely. The Metallics WSK10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics WSK10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics WSK10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.