Metallics FMK832 Screws 370-Pc...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$105.66
$75.23
Image coming soon

Metallics FMK832 Screws 370-Pc 8-32 Fh Sl MS Kit St-zn (Trey 1)

(No reviews yet) Write a Review

Model: FMK832

In Stock (leaves warehouse same day if ordered before 3pm ET)

$105.66
$75.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Screws 370-Pc 8-32 Fh Sl MS Kit St-zn (Trey 1)

  • Kit Components

    • (40) 1-1/2 IN Machine Screw
    • (30) 2 IN Machine Screw
    • (100) 1/2 IN Machine Screw, (75)3/4 IN Machine Screw
    • (75) 1 IN Machine Screw, 50 x 1-1/4 IN Machine Screw

  • Features

    • Accepts standard blade screwdriver. Requires less downward pressure to drive slotted parts than it does those with cross-recessed openings. Use proper fitting blade to minimize slippage.
    • Zinc yellow screws are popular in electronics applications.
    • A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
    • Machine screws form a fastening superior in strength to spaced thread screws.

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

Manufacturer Resources

Product Specs

Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.084 - 0.1 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.285 - 0.312 in.
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Number Of Pieces:
370
Order Minimum Imperial:
1
Order Minimum Uom Imperial:
EA
Pack Type:
Tray
Product Group:
Fasteners
Product Height:
1.25 in
Product Length:
8 in
Product Weight:
2.1 lbs
Product Width:
4.62 in
Slot Depth:
0.029 - 0.045
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Tensile Strength:
850 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw Kit
Type2:
Machine Screw Kit
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw Kit
Product Material:
Steel

Metallics FMK832 – Frequently Asked Questions

1) What lengths and quantities come in the Metallics FMK832 8-32 machine screw kit?
The FMK832 tray holds 370 flat head slotted 8-32 machine screws across six lengths: 100 at 1/2 inch, 75 at 3/4 inch, 75 at 1 inch, 50 at 1-1/4 inch, 40 at 1-1/2 inch, and 30 at 2 inch. The heaviest counts sit in the short lengths, which is what device and plate work consumes fastest.
2) Will 8-32 screws from this kit thread into standard electrical boxes, device yokes and plaster rings?
Yes. 8-32 UNC is the standard tapped thread on steel outlet boxes, device straps and mud rings, and the FMK832 screws are 8-32 with 32 threads per inch to ANSI/ASME B1.1. They are machine screws, so they need a pre-tapped hole or a nut, not raw sheet metal or wood.
3) Is the Metallics FMK832 Buy American or ARRA compliant for a government job?
No. The FMK832 kit is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. If your contract carries a domestic sourcing clause, this kit will not satisfy it.
4) Are these flat head screws going to sit flush, or will the head stand proud?
They are flat head, so they seat flush in a countersunk hole. Head width runs 0.285 to 0.312 inch with a head height of 0.084 to 0.1 inch, built to the ASME B18.6.3-1998 dimensional standard. On a flat, non-countersunk surface the head will stand slightly proud, so use them where the hole is chamfered or countersunk.
5) Can I use these zinc plated steel screws outdoors or in a damp location?
The screws are steel with a zinc finish, which is a plated corrosion coating for dry indoor service, panels, boxes and interior trim. For wet, exterior or washdown locations, specify stainless machine screws instead.
6) Will these machine screws work in sheet metal or wood without a tapped hole?
No. These are straight shank machine screws with external threads that need a pre-tapped hole or a mating nut to form the joint. For untapped sheet metal or wood you want self-tapping or spaced thread screws. Where the hole is tapped, a machine screw gives a stronger fastening than a spaced thread screw.
7) What screwdriver do I need for the Metallics FMK832 kit?
A standard flat blade. These are slotted drive, with a slot width of 0.045 to 0.054 inch and slot depth of 0.029 to 0.045 inch. Match the blade thickness and width to the slot or the tip will cam out and chew the head.
8) How big is the tray, and will it fit in a van bin or tool bag?
The FMK832 ships as an organized tray measuring 8 by 4.62 by 1.25 inches and weighing 2.1 lbs, with each length in its own compartment. That footprint drops into most van shelving bins and service bags.
9) Do I have to buy these screw kits by the case?
No. The FMK832 kit orders as a single each, minimum quantity one tray.
How fast can I get the Metallics FMK832 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics FMK832 come with a warranty?
Absolutely. The Metallics FMK832 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics FMK832?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics FMK832 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!