You may also like
Screws 7/16-14 X 1-1/2 Sh CS St-blk (Jar 100)
Manufacturer Resources
Product Specs
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSHC716112 – Frequently Asked Questions
1) What thread size and length are the Metallics JSHC716112 socket head cap screws?
They are 7/16-14 by 1-1/2 inches. The 7/16-14 thread is the coarse (UNC) series for that diameter, so these thread into 7/16-14 tapped holes or standard 7/16 coarse nuts. Shank length is 1-1/2 inches measured under the head, which is how socket head cap screws are dimensioned.
2) What material and finish are the Metallics JSHC716112 cap screws, and can they be used outdoors?
Carbon steel with a black finish. Black oxide style finishes on carbon steel socket head cap screws are an indoor/dry-location material: there is no zinc or galvanized coating here, so for exposed exterior mounting, wet locations, or washdown areas you want a plated or stainless fastener instead.
3) What is the manufacturer part number to order the 7/16-14 x 1-1/2 black socket head cap screws from Metallics?
Order Metallics part number JSHC716112. That part number covers the 7/16-14 x 1-1/2 inch black carbon steel socket head cap screw in the 100-piece jar, so it is the single number to quote for a reorder of the same fastener.
4) Are these Metallics socket head cap screws suitable for electrical equipment mounting?
They are catalogued by Metallics as an electrical-trade fastener, and a 7/16-14 x 1-1/2 socket head cap screw is a machine-thread screw for tapped holes or nutted through-holes, such as equipment frames, strut-type channel fittings with matching tapped hardware, and bracket connections. It is not a self-tapping or sheet metal screw, so the hole has to be tapped or paired with a 7/16-14 nut.
5) How many screws come in the Metallics JSHC716112 package?
100 pieces, packed in a jar. That jar pack is handy on a service truck or a parts shelf for a size you pull a few at a time, rather than a bulk box you have to decant.
6) What size hex key do I need to drive a 7/16-14 socket head cap screw?
A socket head cap screw takes a hex key in the internal socket, not a wrench on the head, so you will need an Allen/hex key set on hand. The JSHC716112 is a 7/16-14 socket head cap screw, which is driven from the internal hex rather than from a flank, which is why it suits counterbored holes and tight clearances where a wrench cannot swing.
How fast can I get the Metallics JSHC716112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC716112 come with a warranty?
Absolutely. The Metallics JSHC716112 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC716112?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC716112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.