You may also like
Metallics TEKPK1 Screws 8--10 Pn Ph D-Pt TS Kit St-zn (Trey 1)
Model: MET-TEKPK1
Screws 8--10 Pn Ph D-Pt TS Kit St-zn (Trey 1)
Additional Notes
other sizes and quantities available by request
Kit Components
(100) 8 x 1/2, 60 - 8 x 3/4, (50) 8 x 1, (80) 10 x 1/2, (50) 10 x...
Metallics
$134.71
$115.44
Screws Pn Sd-Ph TS D-Pt2 Kit St-zn (Trey 1)
Kit Components
- Power Bits and Setters
- (1) #2 2 IN Square Drive Power Bit - 100R2
- (100) 8 x 1/2, 60 - 8 x 3/4, (50) 8 x 1, (80) 10 x 1/2, (50) 10 x 3/4, (40) 10 x 1
Additional Notes
- other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Drive Type:
- Square
- Fastener Head Type:
- Pan
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Language Code:
- EN
- Number Of Pieces:
- 380
- Order Minimum Imperial:
- 1
- Order Minimum Uom Imperial:
- EA
- Pack Type:
- Tray
- Product Group:
- Fasteners
- Product Height:
- 1.25 in
- Product Length:
- 8 in
- Product Weight:
- 1.18 lbs
- Product Width:
- 4.62 in
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
- Product Type:
- Self-Drilling Screw Kit
- Type2:
- Self-Drilling Screw Kit
- Product Finish:
- Zinc
- Product Details:
- Self-Drilling Screw Kit
- Product Material:
- Steel
Metallics TEKSK1 – Frequently Asked Questions
1) What screw sizes and counts come in the Metallics TEKSK1 self-drilling screw kit?
The TEKSK1 tray holds 380 pieces total: 100 of #8 x 1/2, 60 of #8 x 3/4, 50 of #8 x 1, 80 of #10 x 1/2, 50 of #10 x 3/4, and 40 of #10 x 1. A #2 square drive 2 inch power bit (100R2) is packed with it, so you can run the screws straight out of the tray.
2) Do I need a separate driver bit for the Metallics TEKSK1 screw kit?
No. The screws are square drive, and the kit ships with one #2 square drive 2 inch power bit, part 100R2. If you are outfitting more than one tech, order extra bits since only one is included.
3) Are the screws in the TEKSK1 kit pan head or hex washer head?
Pan head, square drive, in zinc plated steel. Pan heads sit flatter and lower profile than hex washer heads, which is why they suit panel work, strut accessories, and mounting device plates where a hex head would stand off the surface or need a socket driver.
4) Can these self-drilling screws be used outdoors or in damp locations?
They are zinc plated steel, which is a mild corrosion coating meant for dry interior service. For exterior, rooftop, or wash-down work, go with a stainless or coated exterior-rated self-drilling screw instead.
5) Is the Metallics TEKSK1 kit Buy American and ARRA compliant for a government or institutional job?
The TEKSK1 kit is listed as both ARRA compliant and Buy American compliant, with country of origin recorded as multiple. If your spec requires a single named country of manufacture on the submittal, that is the detail to resolve before you commit it to the package.
6) What trades is this self-drilling screw assortment intended for?
Metallics lists the TEKSK1 assortment for electrical, plumbing, heating and air conditioning work. The #8 and #10 sizes in 1/2, 3/4 and 1 inch lengths cover the common sheet metal fastening on those jobs: boxes and straps to studs or duct, device plates, hangers, and panel trim. For heavier gauge or thicker stack-ups you will need longer screws than the 1 inch maximum here.
7) Do these screws need a pilot hole drilled first?
No. These are self-drilling screws (point 2), so the point cuts its own hole in sheet metal as it drives, which is the whole reason they are used on light gauge steel instead of a tapping screw plus a drilled pilot.
8) Will the TEKSK1 tray fit in a service van drawer or tool bag?
The tray measures 8 x 4.62 x 1.25 inches and weighs 1.18 lbs, so it drops into a standard van drawer or the bottom of a tool bag without repacking. It is a tray pack, not loose boxes, so the six sizes stay separated.
9) Do I have to buy the TEKSK1 kit in a case quantity, or can I order one tray?
One tray is the minimum. The order minimum is 1 each, so a single 380-piece tray is a valid order for a one-truck shop as well as a stockroom.
10) Can I get the Metallics screw kit in different sizes or quantities than the standard mix?
Yes. Metallics states other sizes and quantities are available by request for this self-drilling screw kit, so if your crew burns through #10 x 1 faster than the 40 pieces in the standard tray, a different mix can be specified rather than buying two trays.
How fast can I get the Metallics TEKSK1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TEKSK1 come with a warranty?
Absolutely. The Metallics TEKSK1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TEKSK1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TEKSK1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.