Metallics TEKPK1 Screws 8--10 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$134.71
$115.44
Image coming soon

Metallics TEKPK1 Screws 8--10 Pn Ph D-Pt TS Kit St-zn (Trey 1)

(No reviews yet) Write a Review

Model: TEKPK1

In Stock (leaves warehouse same day if ordered before 3pm ET)

$134.71
$115.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Screws 8--10 Pn Ph D-Pt TS Kit St-zn (Trey 1)

  • Additional Notes

    • other sizes and quantities available by request

  • Kit Components

    • (100) 8 x 1/2, 60 - 8 x 3/4, (50) 8 x 1, (80) 10 x 1/2, (50) 10 x 3/2, (40) 10 x 1
    • Power Bits and Setters
    • (1) #2 2 IN Phillips Power Bit - 100P2B

Manufacturer Resources

Product Specs

Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Type:
Pan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Number Of Pieces:
380
Order Minimum Imperial:
1
Order Minimum Uom Imperial:
EA
Pack Type:
Tray
Product Group:
Fasteners
Product Height:
1.25 in
Product Length:
8 in
Product Weight:
1.96 lbs
Product Width:
4.62 in
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Self-Drilling Screw Kit
Type2:
Self-Drilling Screw Kit
Product Finish:
Zinc
Product Details:
Self-Drilling Screw Kit
Product Material:
Steel

Metallics TEKPK1 – Frequently Asked Questions

1) What sizes and quantities come in the Metallics TEKPK1 self-drilling screw kit?
The TEKPK1 tray holds 380 pieces across six #8 and #10 sizes: (100) 8 x 1/2, 60 of 8 x 3/4, (50) 8 x 1, (80) 10 x 1/2, (50) 10 x 3/2, and (40) 10 x 1. A #2 x 2 inch Phillips power bit (100P2B) is packed with it, so you can start driving without pulling a bit from your pouch.
2) Do I need to pre-drill for these TEK screws, and what will they drill into?
No pilot hole. These are self-drilling TEK screws with a drill point, so the screw cuts its own hole as it drives. They are stocked for electrical, plumbing, and HVAC work, which is sheet metal duct, strut, boxes, and light-gauge framing rather than structural steel.
3) What driver do I need for the Metallics TEKPK1 screws?
All of them take a #2 Phillips. The heads are pan head with a Phillips drive, and the kit ships with a #2 x 2 inch Phillips power bit (100P2B), so one bit covers every size in the tray.
4) Are these zinc screws okay for outdoor or damp locations?
These are steel screws with a zinc finish, which is an indoor and protected-location plating. For rooftop duct, exterior strut, or wet areas, use a stainless or coated exterior-rated self-drilling screw instead.
5) Can I get a single size of these Metallics TEK screws in bulk instead of the assortment kit?
Yes. Other sizes and quantities of the same #8 and #10 self-drilling pan head screws are available by request, so if a job runs through one length you don't have to buy assortment trays to get it.
6) Does the Metallics TEKPK1 kit meet Buy American requirements on a federal job?
Metallics lists the TEKPK1 as Buy American compliant and ARRA compliant. Country of origin is recorded as multiple, so if your contract requires documented origin for a specific shipment, get that confirmed against the lot you receive.
7) Will a pan head sit flush, or do I need a flat head screw?
Pan heads sit proud of the surface with a flat bearing face underneath. That's what you want for sheet metal, box and strut fastening where the head clamps the material. If the job calls for a flush, countersunk finish, this kit won't give you that.
8) How is the TEKPK1 kit packaged for a service van?
It ships as a tray, 8 x 4.62 x 1.25 inches and 1.96 lbs, with the sizes separated into compartments. That footprint fits a van shelf or a job box drawer. Minimum order is one each.
How fast can I get the Metallics TEKPK1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TEKPK1 come with a warranty?
Absolutely. The Metallics TEKPK1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TEKPK1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TEKPK1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!