You may also like
Metallics TEKPK1 Screws 8--10 Pn Ph D-Pt TS Kit St-zn (Trey 1)
Model: MET-TEKPK1
Screws 8--10 Pn Ph D-Pt TS Kit St-zn (Trey 1)
Additional Notes
other sizes and quantities available by request
Kit Components
(100) 8 x 1/2, 60 - 8 x 3/4, (50) 8 x 1, (80) 10 x 1/2, (50) 10 x...
Metallics
$134.71
$99.50
Metallics TEKDK1SS Screws 8--10 Hwh TS D-Pt Kit SS (Trey 1)
Model: MET-TEKDK1SS
Screws 8--10 Hwh TS D-Pt Kit SS (Trey 1)
Features
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
Minimum torques are the same for stainless and...
Metallics
$218.63
$199.15
Metallics TEKSK1 Screws Pn Sd-Ph TS D-Pt2 Kit St-zn (Trey 1)
Model: MET-TEKSK1
Screws Pn Sd-Ph TS D-Pt2 Kit St-zn (Trey 1)
Kit Components
Power Bits and Setters
(1) #2 2 IN Square Drive Power Bit - 100R2
(100) 8 x 1/2, 60 - 8 x 3/4, (50) 8 x 1, (80) 10 x 1/2, (50) 10 x 3/4,...
Metallics
$132.46
$97.83
Screws 8--10 Pn Ph D-Pt TS Kit SS (Trey 1)
Kit Components
- (1) #2 x 2 IN Phillips Power Bit
- (50) 8 x 1 IN Pan Head Phillips SS Self Drilling Screw, (80) 10 x 1/2 IN Pan Head Phillips SS Self Drilling Screw
- (50) #10 x 3/4 IN Pan Head Phillips SS Self Drilling Screw, #10 x 1 IN Pan Head Phillips SS Self Drilling Screw
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Country Of Origin:
- MUL
- Division:
- Electrical H1
- Drive Type:
- Phillips
- Fastener Head Type:
- Pan
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
- Number Of Pieces:
- 381
- Order Minimum Imperial:
- 1
- Order Minimum Uom Imperial:
- EA
- Pack Type:
- Tray
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Product Height:
- 1.25 in
- Product Length:
- 8 in
- Product Weight:
- 1.89 lbs
- Product Width:
- 4.62 in
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
- Product Type:
- Self-Drilling Screw Kit
- Type2:
- Self-Drilling Screw Kit
- Product Details:
- Self-Drilling Screw Kit
- Product Material:
- 410 Stainless Steel
Metallics TEKPK1SS – Frequently Asked Questions
1) What screws and sizes come in the Metallics TEKPK1SS self-drilling screw kit?
The TEKPK1SS tray holds 381 pieces total: 50 of the #8 x 1 inch pan head Phillips self-drillers, 80 of the #10 x 1/2 inch, 50 of the #10 x 3/4 inch, plus #10 x 1 inch, and one #2 x 2 inch Phillips power bit to drive them. All four screw sizes are pan head, Phillips drive, drill point.
2) Are the screws in the TEKPK1SS kit actually stainless, and will they hold up outdoors?
They are 410 stainless steel. 410 is a hardenable martensitic stainless, which is what lets a self-drilling point be hard enough to cut its own hole while still giving corrosion resistance well beyond plain zinc-plated steel. It is not 300-series stainless, so for constant salt spray or coastal exposure you would want a heavier corrosion spec; for damp interior, mechanical rooms, and general exterior use it is the normal choice.
3) Does the Metallics TEKPK1SS kit meet Buy American or ARRA requirements for a federal job?
No. The TEKPK1SS is not Buy American compliant and is not ARRA compliant, and its country of origin is listed as multiple. If your contract carries a domestic sourcing clause, this kit will not satisfy it and you need a domestically sourced fastener instead.
4) Do I need to pre-drill for these Metallics pan head screws?
No. These are drill-point (TEK style) screws, so the point drills and taps its own hole in sheet metal in one pass. Just drive them with the included #2 Phillips power bit in a drill or impact driver. Pre-drilling is only needed if you are going into material thicker than a self-driller is rated to cut.
5) What jobs is the Metallics TEKPK1SS screw kit meant for?
It is put together for electrical, plumbing, and HVAC work: fastening device boxes, straps, hangers, duct, and panel covers to sheet metal and light gauge steel. The #10 x 1/2 inch is the high-count size (80 pieces) because short fasteners into strut, duct, and enclosure flanges are what an electrician or sheet metal mechanic burns through fastest.
6) Will a pan head work where I need the screw to sit flush?
No. Every screw in the TEKPK1SS is a pan head, which seats on top of the surface with a raised, rounded profile. That is what you want for clamping straps, brackets, and cover plates to sheet metal, but if the fastener has to sit flush in a countersunk hole you need a flat head self-driller instead.
7) Is the TEKPK1SS a loose bag of screws or an organized tray?
It ships as a tray-packed assortment, not a bag, with each size in its own compartment. The tray measures 8 inches long by 4.62 inches wide by 1.25 inches high and weighs 1.89 pounds, so it drops into a van bin or tool bag and the sizes stay separated.
8) Can I buy a single Metallics TEKPK1SS kit or is there a case minimum?
One tray is the minimum. The TEKPK1SS is sold each with an order minimum of 1, so you can take a single kit per truck rather than committing to a case.
How fast can I get the Metallics TEKPK1SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TEKPK1SS come with a warranty?
Absolutely. The Metallics TEKPK1SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TEKPK1SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TEKPK1SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.