Metallics TEKPK2SS Screws 6 & ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$234.20
Metallics TEKPK2SS Screws 6 & 10 Pn Ph D-Pt TS Kit SS (Trey 1)

Metallics TEKPK2SS Screws 6 & 10 Pn Ph D-Pt TS Kit SS (Trey 1)

(No reviews yet) Write a Review

Model: TEKPK2SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$234.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Screws 6 & 10 Pn Ph D-Pt TS Kit SS (Trey 1)

  • Kit Components

    • (2) #2 Phillips Power Bit
    • (100) 6 x 1, (40) 6 x 1-1/2, (40) 10 x 1, (30) 10 x 1-1/2, (20) 10 x 2

Manufacturer Resources

Product Specs

Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Type:
Pan
Language Code:
EN
Number Of Pieces:
231
Order Minimum Imperial:
1
Order Minimum Uom Imperial:
EA
Pack Type:
Tray
Product Group:
Fasteners
Product Height:
1.25 in
Product Length:
8 in
Product Weight:
1.537 lbs
Product Width:
4.62 in
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Self-Drilling Screw Kit
Type2:
Self-Drilling Screw Kit
Product Details:
Self-Drilling Screw Kit
Product Material:
410 Stainless Steel

Metallics TEKPK2SS – Frequently Asked Questions

1) What sizes and quantities come in the Metallics TEKPK2SS self-drilling screw kit?
The TEKPK2SS tray holds 231 pieces total: 100 of #6 x 1 inch, 40 of #6 x 1-1/2, 40 of #10 x 1, 30 of #10 x 1-1/2, and 20 of #10 x 2, plus two #2 Phillips power bits. So you get both a light-gauge sheet metal screw (#6) and a heavier #10 in three lengths for thicker stack-ups.
2) Are the screws in this Metallics TEK kit actually stainless, and will they hold up outdoors?
They are 410 stainless steel. 410 is a hardenable martensitic stainless, which is why it can be used for a drill point and still cut its own hole; it gives corrosion resistance well beyond plain zinc-plated steel while retaining the hardness a self-drilling tip needs. It is not as corrosion resistant as 300-series stainless, so for constant salt spray or submerged conditions specify a different alloy.
3) Will this screw kit meet a Buy American requirement on a federal job?
The TEKPK2SS is flagged Buy American compliant and ARRA compliant in the manufacturer data, with country of origin listed as multiple. For a federally funded project, pull those flags onto your submittal along with the part number TEKPK2SS.
4) Do I need a pilot hole for these #6 and #10 screws, or do they drill themselves?
No pilot hole. These are drill-point (self-drilling) screws, so the tip cuts through sheet metal, light steel studs, and strut as it drives. Use a drill or impact driver with the included #2 Phillips bit and keep steady pressure until the point breaks through, then let the threads pull the joint up.
5) What bit do I need to drive these, and is one included?
Phillips drive, pan head, and two #2 Phillips power bits ship in the tray. That is the correct size for both the #6 and #10 screws in the kit, so nothing else has to be bought to start driving.
6) Is a pan head the right choice for mounting boxes and straps, or do I want a hex washer head?
Pan head is what this kit gives you. The low, rounded profile with a flat bearing face works well through knockouts, box ears, conduit straps, and panel covers where a hex washer head would stand too tall or foul a cover plate. If you are fastening through oversized holes or need more bearing surface against sheet metal, a hex washer head TEK is the better pick.
7) Which length should I grab for fastening through a double layer of sheet metal or into strut?
Pick by total grip. The 1 inch #6 and #10 handle single-layer sheet metal, box ears, and straps. Step to 1-1/2 inch when you are stacking two layers or standing a strap off the surface, and use the #10 x 2 inch for the deepest stack-ups in the tray. Keep enough thread past the far face for the point to clear and the threads to engage fully.
8) How is this kit packaged, and will it fit in a van drawer or tool bag?
It comes as a compartmented tray measuring 8 x 4.62 x 1.25 inches and weighing 1.537 lbs, so it drops into a standard van drawer or the lower pocket of a tool bag without repacking. Sizes stay separated in the tray rather than loose in a bag.
9) Can I buy a single tray of the Metallics TEKPK2SS, or is there a case minimum?
One tray is the minimum. The TEKPK2SS orders by the each, so a single kit per truck or per tech is a valid order quantity.
How fast can I get the Metallics TEKPK2SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TEKPK2SS come with a warranty?
Absolutely. The Metallics TEKPK2SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TEKPK2SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TEKPK2SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!