SEPCO 131S Zinc Plated Steel 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.42
SEPCO 131S Zinc Plated Steel 1-Hole Click-On Conduit Strap, 3/8-Inch

SEPCO 131S Zinc Plated Steel 1-Hole Click-On Conduit Strap, 3/8-Inch

(No reviews yet) Write a Review

Model: 131S

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.42
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO 131S Zinc Plated Steel 1-Hole Click-On Conduit Strap, 3/8-Inch

The SEPCO 131S is a zinc plated steel 1-hole click-on strap sized for 3/8-Inch conduit, built to give electricians a fast, tool-friendly way to anchor conduit runs to a wall, stud, joist, or other structural surface. The click-on strap body lets installers snap the fitting into place without pre-threading a screw through the loop first, which speeds up repetitive strap-and-mount work on commercial and residential jobs alike. Formed from zinc plated steel, the 131S resists surface corrosion while standing up to the everyday mechanical stress of holding conduit in place through rough-in and finish work. Its compact 1-hole footprint keeps the mounting profile low, making it a practical choice anywhere a single fastener needs to carry the load of a 3/8-Inch conduit run.

Key Features

  • Trade Size: Sized for 3/8-Inch conduit, matching common branch-circuit raceway runs found in residential and light commercial wiring.
  • Durable Construction: Zinc plated steel body resists corrosion and rust, helping the strap hold up over the life of the installation rather than degrading in damp framing cavities.
  • 1-Hole Click-On Design: A single mounting hole paired with a click-on strap body speeds installation compared to traditional two-hole straps, letting installers snap the conduit into the strap and drive one fastener.
  • Secure Conduit Support: Holds 3/8-Inch conduit firmly against studs, walls, or structural framing to keep raceway runs straight, neat, and properly supported along their length.
  • Zinc Plated Finish: The plated finish adds a protective barrier against moisture and handling wear during shipping, storage, and installation.
  • Time-Saving Installation: The click-on mounting method reduces the steps needed to secure each conduit run, which adds up across a job with many strap points.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Conduit and Raceway Support Systems
  • Renovation and New Construction Wiring
  • Panelboard and Branch-Circuit Routing
  • General Surface and Stud-Mounted Conduit Runs
  • Rough-In Conduit Anchoring on Wood or Metal Framing

Why SEPCO?

SEPCO builds conduit hardware like the 131S from corrosion-resistant zinc plated steel so electricians can count on a secure, long-lasting hold in demanding installation environments. The straightforward 1-hole click-on design reflects SEPCO's focus on practical, professional-grade fittings that save installation time in the field without sacrificing durability or a clean, properly supported finish to every conduit run. For contractors managing multiple strap points across a job, that combination of speed and corrosion resistance is what keeps SEPCO conduit hardware on the truck.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Conduit Strap
Configuration:
1-Hole Click-On
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Material:
Zinc Plated Steel
Product Size:
3/8-Inch

SEPCO 131S – Frequently Asked Questions

1) How does a click-on conduit strap install differently from a standard two-hole strap?
With the 131S you snap the conduit into the strap body and drive a single fastener. A traditional two-hole strap has to be positioned and fastened on both sides of the pipe, and often threaded first. Across a run with dozens of support points, the one-hole click-on cuts the work roughly in half.
2) Are mounting screws or anchors included with the SEPCO 131S strap?
No fasteners come with the strap. The 131S has a single mounting hole and you supply the screw or anchor suited to the surface, a wood screw into a stud or joist, a self-drilling screw into metal framing, or a masonry anchor on concrete or block.
3) Will a zinc plated steel conduit strap hold up in a damp or unheated space?
Zinc plating gives the 131S a protective barrier against moisture and handling wear, which suits damp framing cavities, unheated basements, and interior rough-in. It is plated carbon steel, not stainless, so for continuously wet, exterior, or corrosive chemical environments a stainless or PVC-coated support is the better call.
4) Can one SEPCO 131S strap support a 3/8-inch conduit run on its own fastener?
Yes, the 131S is a one-hole design meant to carry a 3/8-inch conduit on a single fastener at each support point. Space the straps along the run per your local code requirements for the raceway type you are installing, and land each one on solid framing rather than drywall alone.
5) What is the manufacturer part number for the SEPCO 3/8-inch click-on conduit strap?
Order it as SEPCO 131S. That is the full part identity for the zinc plated steel 1-hole click-on strap in the 3/8-inch size, and there is one configuration, so no finish or size suffix to specify.
6) Is the SEPCO 131S strap suitable for stud-mounted rough-in on a commercial job?
That is its main use. The 131S anchors 3/8-inch conduit to wood or metal framing during rough-in on both commercial and residential work, keeping branch-circuit raceway runs straight and supported through to finish. The low one-hole footprint also keeps the strap from interfering with drywall going on over the stud.
How fast can I get the SEPCO 131S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO 131S come with a warranty?
Absolutely. The SEPCO 131S is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO 131S?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO 131S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!