SEPCO 134S 1-Inch Zinc-Plated ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.91
SEPCO 134S 1-Inch Zinc-Plated Steel 1-Hole Click-On Conduit Strap

SEPCO 134S 1-Inch Zinc-Plated Steel 1-Hole Click-On Conduit Strap

(No reviews yet) Write a Review

Model: 134S

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO 134S 1-Inch Zinc-Plated Steel 1-Hole Click-On Conduit Strap

The SEPCO 134S is a 1-Inch, 1-hole click-on strap manufactured from zinc-plated steel, built to securely mount and support conduit or pipe runs during electrical rough-in and finish work. Its click-on profile allows the strap to snap directly onto 1-Inch conduit for fast, tool-minimal attachment, while the single mounting hole permits quick fastening to a wall, stud, joist, or other structural surface with just one fastener. Finished in zinc plating over steel, the SEPCO 134S is engineered to hold up to the everyday demands of commercial and residential electrical installation. It is a straightforward, purpose-built piece of mounting hardware meant for electricians and contractors who need a dependable way to route and secure 1-Inch conduit runs without extra hardware or complicated assembly steps.

Key Features

  • Trade Size: Sized for 1-Inch conduit or pipe, giving installers a properly matched fit for a secure, snug hold along the run.
  • Durable Construction: Zinc-plated steel construction stands up to routine handling and everyday jobsite conditions, offering long-lasting strength where the strap is installed.
  • Click-On Mounting: The click-on style lets the strap snap onto the conduit quickly, cutting down on installation time compared to strap styles that require threading or wrapping.
  • 1-Hole Configuration: A single mounting hole keeps the fastening point simple, letting installers anchor the strap to a wall, stud, or structural member with one screw or fastener.
  • Zinc-Plated Finish: The zinc plating over the steel body is intended to help the strap resist the corrosion that comes with routine jobsite exposure and handling.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Conduit and Raceway Support Systems
  • Commercial and Residential Electrical Installations
  • Securing 1-Inch Conduit or Pipe to Walls, Studs, and Structural Surfaces
  • New Construction and Retrofit Wiring Projects
  • General-Purpose Conduit Strapping for Electrical Contractors

Why SEPCO?

SEPCO builds practical electrical hardware like the 134S strap around straightforward, durable construction, pairing a zinc-plated steel body with a simple 1-hole, click-on design that electrical professionals can install quickly and rely on. It is a no-frills piece of hardware suited to the routine, repetitive task of securing conduit throughout a job, built from materials meant to hold up over the life of the installation. For contractors standardizing on a single strap style across a project, the consistent 1-Inch sizing and 1-hole, click-on format of the SEPCO 134S makes it easy to keep installation methods uniform from box to box.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Conduit Strap
Connection Type:
Click-On
Configuration:
1-Hole
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Material:
Zinc-Plated Steel
Product Size:
1-Inch

SEPCO 134S – Frequently Asked Questions

1) Will the SEPCO 134S strap fit 1-inch EMT, or is it sized for rigid conduit?
The 134S is a one trade size strap, made for 1-inch conduit or pipe. Trade size 1 EMT and trade size 1 rigid have different outside diameters, so a click-on strap sized to one will not snap tight on the other. Match the strap to the conduit type you are running before you buy a case of them.
2) Does the SEPCO 134S conduit strap come with screws or anchors?
No fasteners are included. The 134S has a single mounting hole and you supply the screw or anchor to suit the substrate, a wood screw into a stud or joist, a self-drilling screw into metal framing, or a masonry anchor into block or concrete. Order fasteners separately so the crew is not short on the wall.
3) How does a click-on conduit strap differ from a two-hole strap, and when should I use each?
A click-on strap like the SEPCO 134S snaps over the conduit and anchors with a single fastener, so you set it with one screw and no threading or wrapping. That is the fast choice for long repetitive runs on studs, joists and drywall-over-wood walls. A two-hole strap takes two fasteners and resists twisting and rotation better, which is what you want where the run carries side load, in exposed mechanical rooms, or where an inspector expects a more positive attachment. For straight horizontal or vertical runs of 1-inch conduit at normal support spacing, the one-hole click-on does the job.
4) Is a zinc-plated steel conduit strap OK outdoors or in a damp location?
Zinc-plated steel is a general purpose indoor finish. It handles routine jobsite exposure and handling, but plating over steel is not a marine or continuously wet duty coating. For rooftops, exterior walls, wash-down areas or corrosive process spaces, step up to a stainless or hot-dip galvanized strap instead of the 134S.
5) What is the correct SEPCO part number to reorder this 1-inch click-on strap?
Order it as SEPCO 134S. That single manufacturer part number covers the 1-inch, one-hole, click-on zinc-plated steel strap, so there is no finish or length suffix to add when you reorder for a second phase of the job.
6) Can I use the 134S strap on 1-inch pipe as well as electrical conduit?
Yes. It is built to mount and support conduit or pipe runs, so 1-inch pipe with the same outside diameter as the conduit it is sized for will seat in it. Property maintenance crews use straps like this for small pipe drops and low-voltage raceway as well as electrical rough-in. It is a support strap, not a hanger rated for suspended load.
7) Can I standardize on one strap style across an entire electrical rough-in?
For 1-inch runs, yes. The 134S is a single fixed configuration, 1-inch, one-hole, click-on, so every strap installs the same way and the crew's method stays uniform from box to box. You will still need other trade sizes for 1/2, 3/4 and larger conduit, since a click-on strap only fits the one size it is formed for.
How fast can I get the SEPCO 134S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO 134S come with a warranty?
Absolutely. The SEPCO 134S is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO 134S?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO 134S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!