SEPCO 136S Zinc Plated Steel 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.91
SEPCO 136S Zinc Plated Steel 1-Hole Click-On Conduit Strap, 1-1/2-Inch

SEPCO 136S Zinc Plated Steel 1-Hole Click-On Conduit Strap, 1-1/2-Inch

(No reviews yet) Write a Review

Model: 136S

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO Zinc Plated Steel 1-Hole Click-On Conduit Strap, 1-1/2-Inch

SEPCO's Zinc Plated Steel 1-Hole Click-On Conduit Strap is built for the 1-1/2-Inch trade size, giving electricians and maintenance crews a quick, dependable way to anchor conduit runs to a wall, ceiling, joist, or other structural surface. The click-on design lets the strap snap directly onto the conduit before final fastening, which speeds up rough-in work on new construction jobs as well as retrofits and service calls where time on the ladder matters. The zinc-plated finish is engineered into the steel body to resist corrosion in typical indoor electrical environments, helping the strap keep its grip and appearance over the working life of the installation. As a single-hole strap, it is sized for straightforward single-point mounting wherever a run of 1-1/2-Inch conduit needs to be held firmly in place along its path.

Key Features

  • Trade Size: Sized for 1-1/2-Inch conduit, matching this strap to the corresponding raceway diameter for a secure, properly seated fit.
  • Durable Construction: Zinc Plated Steel body resists corrosion and everyday wear and tear, supporting long-term holding strength in both exposed and concealed electrical installations.
  • 1-Hole Click-On Design: The single mounting hole paired with the click-on profile lets installers snap the strap onto the conduit and drive the fastener in one straightforward motion, cutting install time compared with multi-piece strap hardware that has to be aligned and threaded by hand.
  • Single-Point Mounting: The one-hole layout is well suited to spot-securing a conduit run at regular intervals along studs, joists, or structural steel, keeping the raceway straight and properly supported.
  • Job-Ready Finish: The zinc plating provides a clean, uniform steel surface that stands up to routine handling on the jobsite from delivery through final installation.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Securing 1-1/2-Inch Conduit Runs to Walls, Ceilings, and Joists
  • Commercial and Industrial Electrical Installations
  • Conduit and Raceway Support Systems
  • Residential and Light Commercial Wiring Projects
  • New Construction, Retrofit, and Electrical Renovation Work

Why SEPCO?

SEPCO builds this strap from Zinc Plated Steel specifically to stand up to the daily demands of conduit support, giving installers a dependable, corrosion-resistant point of attachment they can count on run after run. The simple 1-Hole Click-On configuration reflects a practical, jobsite-first approach to hardware design, helping crews move faster on rough-in without sacrificing a secure hold on the 1-1/2-Inch conduit it is sized for. For electrical contractors who need consistent, reliable mounting hardware they can stock and reorder with confidence, SEPCO's conduit straps are built to perform.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Conduit Strap
Configuration:
1-Hole
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Material:
Zinc Plated Steel
Product Size:
1-1/2-Inch

SEPCO 136S – Frequently Asked Questions

1) Is a 1-hole conduit strap enough to support 1-1/2 inch conduit, or do I need a two-hole strap?
A 1-hole strap like the 136S spot-secures the run at a single fastener point along studs, joists, or structural steel, and that is the usual choice for routine horizontal and vertical support intervals. Where you want the conduit pinned against twist or rotation, or you are anchoring near a change of direction or a heavy pull point, a two-hole strap gives you a second fastener and a more rigid hold. The 136S is the one-hole configuration.
2) What is the click-on design on the SEPCO 136S and does it hold the conduit before I fasten it?
Yes. The click-on profile lets the strap snap onto the 1-1/2 inch conduit first, so the raceway is held in place while you drive the fastener. That matters on ladder work and overhead rough-in, where a multi-piece strap has to be aligned and threaded by hand with one spare hand you do not have.
3) Will a zinc plated steel conduit strap hold up outdoors or in a wet area?
The 136S body is zinc plated steel, and the plating is described for corrosion resistance in typical indoor electrical environments. For sustained outdoor exposure, washdown areas, or corrosive process environments, specify a strap material rated for that condition instead.
4) Do SEPCO 136S conduit straps come with mounting screws or anchors?
The 136S is the strap itself, with one mounting hole. Fasteners are selected for the substrate you are hitting, so you will need the appropriate screws into wood studs or joists, self-drilling screws for structural steel, or anchors for masonry and concrete. Add those to the order separately.
5) I am standardizing conduit support hardware across a building. Can I order the 136S in other conduit sizes?
SEPCO builds the click-on 1-hole strap as a sized family, and the 136S is the 1-1/2 inch member of it. For a building-wide standard you would order the matching model for each trade size on the job and keep the same zinc plated steel 1-hole click-on style throughout so crews install it the same way everywhere. The full SEPCO catalog lists the size range.
6) What is the manufacturer part number for the SEPCO 1-1/2 inch click-on strap?
Order it as SEPCO 136S. That number covers the 1-1/2 inch zinc plated steel 1-hole click-on conduit strap, and it is the designation to quote when matching an existing spec or reordering for the same job.
How fast can I get the SEPCO 136S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO 136S come with a warranty?
Absolutely. The SEPCO 136S is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO 136S?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO 136S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!