SEPCO C27T 1/2-Inch Malleable ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.90
SEPCO C27T 1/2-Inch Malleable Iron Insulated-Throat Straight Cable Connector

SEPCO C27T 1/2-Inch Malleable Iron Insulated-Throat Straight Cable Connector

(No reviews yet) Write a Review

Model: C27T

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.90
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO C27T 1/2-Inch Malleable Iron Insulated-Throat Straight Cable Connector

SEPCO's C27T Insulated-Throat Straight Cable Connector joins armored cable or conduit to an enclosure, box, or fitting with a secure, code-compliant mechanical termination. Machined from malleable iron for strength and long service life in commercial and industrial wiring systems, this 1/2-Inch connector features an integrated insulated throat that shields conductor insulation from abrasion as the cable passes through the connector body. The straight, inline profile keeps the connection compact and low-profile, making the C27T a practical choice wherever a direct, in-line cable-to-enclosure connection is required rather than an angled fitting. Electricians and maintenance crews can rely on this connector as a straightforward, no-frills way to terminate cable at a box or enclosure without sacrificing conductor protection.

Key Features

  • Trade Size: 1/2-Inch connector sized to match standard cable and conduit runs for a proper, snug fit at the enclosure knockout.
  • Durable Malleable Iron Construction: The malleable iron body resists impact and mechanical stress, holding up to the rigors of jobsite installation, handling, and long-term service in commercial and industrial settings.
  • Insulated Throat: A built-in insulating throat lines the connector opening, protecting conductor insulation from abrasion and cutting as cable is pulled through during and after installation.
  • Straight Connector Body: The straight-through, inline profile supports direct cable-to-box or cable-to-enclosure connections without added offset or angle, keeping the installed footprint compact.
  • Model C27T: Part of SEPCO's C-series cable connector lineup, giving installers a consistent, familiar fit and performance across compatible SEPCO fittings.
  • Single-Piece Reliability: A rugged connector body designed to hold up over repeated use and long-term installation without loosening.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Armored Cable (AC/MC) and Conduit Terminations
  • Commercial and Industrial Electrical Installations
  • Panelboard, Junction Box, and Enclosure Wiring Connections
  • Renovation and New Construction Electrical Work
  • General-Purpose Cable Routing Where a Straight, Inline Connector Is Preferred

Why SEPCO?

SEPCO builds electrical connectors like the C27T from malleable iron for dependable mechanical strength on demanding jobsites. The insulated throat design reflects a focus on conductor protection that electricians count on for clean, code-compliant terminations at every enclosure and box. Choose SEPCO for straightforward, durable cable connector hardware built for everyday commercial and industrial electrical installation work, backed by consistent sizing and fit across the C-series connector lineup.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Cable Connector
Configuration:
Insulated Throat
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Fittings
Product Material:
Malleable Iron
Product Size:
1/2"

SEPCO C27T – Frequently Asked Questions

1) Will the SEPCO C27T cable connector fit a 1/2-inch knockout on a junction box or panel?
Yes. The C27T is a 1/2-inch trade size straight cable connector, so it lands in a standard 1/2-inch enclosure knockout and secures with its locknut side inside the box. The straight, inline body keeps the termination flush to the box without any offset, which matters when you are landing several cables close together on a panelboard side.
2) What is an insulated throat connector for, and do I still need a separate anti-short bushing?
The insulated throat on the C27T is built into the connector opening, lining the bore so conductor insulation is not abraded or cut as the cable is pulled through. That is the protection a plastic anti-short bushing is normally added to provide, so the insulating function is integral to the fitting rather than a loose piece you have to remember to install.
3) Is the SEPCO C27T good for armored cable, or only for conduit?
It is used for both. SEPCO lists the C27T for armored cable (AC/MC) and conduit terminations into panelboards, junction boxes, and enclosures, in new construction and renovation work alike.
4) Why choose a malleable iron cable connector instead of a die cast or steel one?
The C27T body is malleable iron, which takes impact and mechanical stress without cracking the way zinc die cast can when it is struck or over-torqued. That is the reason it gets specified for commercial and industrial installations where the fitting gets handled hard on the jobsite and then has to stay tight for years.
5) What part number do I order for the SEPCO 1/2-inch insulated throat straight connector?
Order model C27T. It is the 1/2-inch insulated throat straight cable connector in SEPCO's C-series connector lineup, and it is a single configuration, so there is no finish or length choice to specify on the order.
6) Can I standardize on SEPCO C-series connectors across a building so my crews see the same fitting everywhere?
That is how the line is built. The C27T is part of SEPCO's C-series cable connector lineup, with consistent sizing and fit across the compatible SEPCO fittings, so an MRO or multi-family stock room can hold one family of connectors and keep installation the same from panel to panel.
How fast can I get the SEPCO C27T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO C27T come with a warranty?
Absolutely. The SEPCO C27T is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO C27T?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO C27T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!