SEPCO C29T Insulated Throat St...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.00
SEPCO C29T Insulated Throat Straight Cable Connector, 1-Inch Zinc-Plated Malleable Iron

SEPCO C29T Insulated Throat Straight Cable Connector, 1-Inch Zinc-Plated Malleable Iron

(No reviews yet) Write a Review

Model: C29T

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO C29T Insulated Throat Straight Cable Connector, 1-Inch Zinc-Plated Malleable Iron

The SEPCO C29T Insulated Throat Straight Cable Connector is a 1-inch trade size fitting built from zinc-plated malleable iron, engineered to provide a secure, insulated termination point where cable enters conduit bodies, junction boxes, panels, and other enclosures. The connector's straight-through profile keeps cable runs simple and direct, while the insulated throat protects conductor insulation from abrasion both during pulling and throughout the life of the installation. Zinc-plated malleable iron construction gives the C29T the mechanical strength and corrosion resistance that commercial and industrial electricians expect from a professional-grade fitting.

Key Features

  • Trade Size: 1-Inch sizing matches standard cable and conduit entry points for straightforward installation.
  • Durable Construction: Zinc-plated malleable iron body resists corrosion and rust while standing up to the rigors of jobsite handling.
  • Insulated Throat: A built-in insulating throat shields conductor insulation from sharp edges and abrasion as cable is pulled through the connector.
  • Straight Connector Design: The straight-through body simplifies cable routing and reduces bulk inside crowded enclosures and panels.
  • Corrosion-Resistant Finish: The zinc-plated surface finish adds an extra layer of protection against moisture and oxidation for long-term reliability.
  • Malleable Iron Body: Malleable iron construction provides the rigidity needed to maintain a secure, long-lasting mechanical connection at the point of cable entry.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Cable and Conduit Entry Connections
  • Commercial and Industrial Electrical Installations
  • Panelboard and Enclosure Wiring
  • Raceway and Cable Management Systems
  • New Construction and Renovation Projects
  • Retrofit and Maintenance Electrical Work

Why SEPCO?

SEPCO manufactures the C29T connector from zinc-plated malleable iron to deliver the strength and corrosion resistance that professional electrical contractors count on for demanding commercial and industrial environments. The insulated throat design reflects SEPCO's attention to protecting conductor insulation at every point of contact, helping installers achieve a clean, reliable cable connection. For a straightforward, dependable 1-inch straight cable connector, SEPCO delivers the construction quality electricians need to get the job done right.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Cable Connector
Product Finish:
Zinc-Plated
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Fittings
Product Material:
Malleable Iron
Product Size:
1"

SEPCO C29T – Frequently Asked Questions

1) Does the SEPCO C29T have an insulated throat, and why does that matter on a cable pull?
Yes, the C29T is built with an insulated throat. The insulating ring sits where the conductors pass through the fitting, so the cable jacket and conductor insulation ride over plastic instead of a cast metal edge during the pull and for the life of the install. That is what electricians look for when the spec or inspector calls for an insulated-throat connector at the box.
2) Is the C29T connector strong enough for industrial use, or is it a die-cast fitting?
It is malleable iron, not die cast zinc. Malleable iron holds thread and clamp pressure without cracking, which is why it gets used in commercial and industrial panels, raceway runs, and enclosure wiring rather than light residential work.
3) Will the SEPCO C29T hold up in a damp or corrosive environment?
The body carries a zinc-plated finish over the malleable iron, which gives it resistance to moisture and oxidation in typical indoor commercial and industrial settings. Zinc plating is a protective coating, not a hot-dip or PVC-coated system, so for continuously wet, chemical, or exterior-exposed locations most specs call for a heavier corrosion system.
4) Straight versus 45 or 90 degree cable connector, which should I use at a crowded panel?
The C29T is the straight-through version, so the cable enters the enclosure on the same axis as the run. That keeps the fitting short and reduces bulk inside the gutter space of a panel when the cable is already approaching squarely. Where the cable has to turn hard right at the enclosure wall, an angled connector is the better choice because it makes the bend outside the box instead of forcing a tight bend radius in the wiring space.
5) What is the exact part number to order for the SEPCO 1 inch insulated throat straight cable connector?
Order it as SEPCO C29T. That is the manufacturer part number and it covers the 1 inch zinc-plated malleable iron straight cable connector with insulated throat. There is a single configuration under that number, so there is no finish or size suffix to add.
6) Can I use the C29T for new construction and also for retrofit or maintenance work?
Both. The C29T is used on cable and conduit entry connections in new construction, in renovation, and in retrofit or ongoing maintenance electrical work, including panelboard and enclosure wiring and raceway or cable management systems. For a facilities or MRO buyer standardizing a stockroom, it is a single 1 inch fitting that covers all of those entries.
7) Where can I get the full SEPCO specs for the C29T connector?
SEPCO publishes a product catalog covering the C29T and the rest of the fitting line, hosted at zensupply.com/content/pdf/sepco/sepco-product-catalog.pdf. Use it when you need the dimensional and cable range detail behind the 1 inch trade size.
How fast can I get the SEPCO C29T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO C29T come with a warranty?
Absolutely. The SEPCO C29T is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO C29T?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO C29T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!