SEPCO DB100-IC Big Bite Series...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.31
SEPCO DB100-IC Big Bite Series Insulated Tubular Steel Straight Conduit Connector

SEPCO DB100-IC Big Bite Series Insulated Tubular Steel Straight Conduit Connector

(No reviews yet) Write a Review

Model: DB38-IC

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO DB100-IC Big Bite Series Insulated Tubular Steel Straight Conduit Connector

The SEPCO DB100-IC Big Bite Series is a tubular steel insulated straight connector engineered to join sections of steel conduit into a secure, continuous raceway run, and this connector is available in trade sizes ranging from 3/8" through 2" to cover the sizes most common on steel conduit rough-in work. Its insulated body helps shield conductors from abrasion as wire is pulled through the connection point, supporting a clean, professional installation on commercial, industrial, and residential jobs. Configured as a straight, in-line connector, the DB100-IC joins two lengths of steel conduit end-to-end for a continuous, organized raceway path across the full 3/8" - 2" size range.

Key Features

  • Trade Size Range: The DB100-IC Big Bite connector family spans trade sizes from 3/8" through 2", covering the sizes most common on steel conduit rough-in work.
  • Tubular Steel Construction: Built from tubular steel, the connector body offers the rigidity and strength needed to stand up to demanding job-site conditions.
  • Insulated Design: An insulated interior helps shield conductors from abrasion as wire is pulled through the connector, adding a layer of protection at the connection point.
  • Straight Connector Configuration: Configured as a straight, in-line connector, the DB100-IC joins two lengths of steel conduit end-to-end for a continuous raceway path.
  • Big Bite Series: Part of SEPCO's Big Bite series of steel conduit connectors, engineered for dependable, everyday electrical rough-in work.
  • Contractor-Ready Design: Sized and configured for use alongside standard steel conduit runs, helping installers keep raceway systems organized and secure.
  • Simple, Purposeful Build: A single-purpose straight connector with no unnecessary complexity, making it easy for crews to stock and specify for routine conduit work.

Technical Specifications

  • Trade Size: 3/8" - 2"

Typical Applications

  • Steel Conduit Connections
  • Commercial and Industrial Electrical Installations
  • Conduit and Raceway Systems
  • Panelboard and Load Center Wiring Runs
  • Renovation and New Construction Electrical Work
  • General Electrical Rough-In and Maintenance

Why SEPCO?

SEPCO pairs tubular steel construction with an insulated design on the DB100-IC to support conduit connections that hold up to daily use on the job site. The Big Bite series, spanning trade sizes from 3/8" through 2", reflects SEPCO's focus on practical, no-nonsense fittings that make steel conduit runs easier to assemble and maintain. For electricians and contractors who need a dependable straight connector for their raceway systems, SEPCO's DB100-IC is built to get the job done, run after run, without adding unnecessary steps to the install.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Conduit Connector
Series:
Big Bite
Configuration:
Straight
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Fittings
Product Material:
Steel

SEPCO DB38-IC – Frequently Asked Questions

1) What trade sizes does the SEPCO DB100-IC Big Bite insulated connector come in?
The Big Bite insulated straight connector runs seven trade sizes: 3/8 inch (DB38-IC), 1/2 inch (DB50-IC), 3/4 inch (DB75-IC), 1 inch (DB100-IC), 1-1/4 inch (DB125-IC), 1-1/2 inch (DB150-IC), and 2 inch (DB200-IC). Order by the trade size of the conduit you are joining, not by the DB100-IC number alone, since that part number is the 1 inch connector specifically.
2) Is the SEPCO DB100-IC a straight in-line connector or an elbow?
Straight, in-line only. The DB100-IC joins two lengths of steel conduit end to end on the same axis to carry a run through. If you need to turn a corner, this is the wrong fitting for that point in the run.
3) I have a mixed run of 3/4 inch and 1 inch steel conduit. Will one SEPCO DB-IC connector join the two sizes?
No. Each Big Bite DB-IC is a single-size straight connector, so DB75-IC takes 3/4 inch on both ends and DB100-IC takes 1 inch on both ends. To change size mid-run you need a reducing fitting or a reducing bushing at a box, not a straight connector.
4) What does the "insulated" in the SEPCO DB100-IC actually do for a wire pull?
The connector has an insulated interior that shields conductors from abrasion at the connection point as wire is pulled through. On long pulls where the cable rubs at every joint, that is the difference between clean insulation and nicked jacket at the fitting.
5) Is the SEPCO Big Bite DB-IC connector steel or die cast?
Tubular steel. SEPCO builds the Big Bite DB-IC body from steel for rigidity on job-site conditions, which is what you want on a steel conduit raceway rather than a lighter zinc or plastic body.
6) Can I use SEPCO DB-IC connectors on a commercial panelboard feed, or is this residential only?
Both. SEPCO lists the Big Bite insulated connector for commercial, industrial, and residential work, including panelboard and load center wiring runs, general rough-in, and renovation or new construction raceway systems.
7) What sizes should a contractor stock for routine steel conduit rough-in?
The Big Bite DB-IC range tops out at 2 inch and starts at 3/8 inch, and SEPCO built that span around the sizes most common on steel conduit rough-in. For most branch-circuit and panel feed work that means 1/2 inch (DB50-IC), 3/4 inch (DB75-IC), and 1 inch (DB100-IC) on the truck, with 1-1/4 through 2 inch pulled per job.
How fast can I get the SEPCO DB38-IC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO DB38-IC come with a warranty?
Absolutely. The SEPCO DB38-IC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO DB38-IC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO DB38-IC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!