SEPCO DB46 Insulated Malleable...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$9.95
SEPCO DB46 Insulated Malleable Iron 90-Degree Big Bite Conduit Connector

SEPCO DB46 Insulated Malleable Iron 90-Degree Big Bite Conduit Connector

(No reviews yet) Write a Review

Model: DB5090-IC

In Stock (leaves warehouse same day if ordered before 3pm ET)

$9.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO DB46 Insulated Malleable Iron 90-Degree Big Bite Conduit Connector

The SEPCO DB46 Insulated Malleable Iron 90-Degree Big Bite Connector simplifies conduit direction changes in electrical raceway systems and is available in trade sizes ranging from 1/2" to 1" to fit a variety of conduit runs. Built from rugged malleable iron, this connector delivers a durable, corrosion-resistant fitting for demanding job-site conditions, while the insulated throat helps protect conductor insulation from abrasion as wires are pulled through the 90-degree bend. The SEPCO Big Bite connector design provides a secure grip on conduit ends without additional hardware, making the DB46 a practical choice for electricians and contractors who need a dependable angle fitting for commercial and industrial conduit runs.

Key Features

  • Trade Size Range: Available in 1/2", 3/4", and 1" trade sizes to fit a range of conduit runs.
  • Durable Construction: Built from malleable iron for strength and long-term durability in commercial and industrial conduit runs.
  • Insulated Design: The insulated throat helps protect conductor insulation from damage during wire pulls through the fitting.
  • 90-Degree Configuration: Provides a 90-degree change in direction, allowing conduit runs to route around obstacles and through tight spaces.
  • Big Bite Connector Style: Features the SEPCO Big Bite connector design, built to provide a secure hold on conduit ends without additional hardware.
  • Connector Function: Serves as a connector for joining conduit sections within a raceway system, supporting a continuous, protected wiring path.

Technical Specifications

  • Angle: 90°
  • Trade Size: 1/2" - 1"

Typical Applications

  • Conduit and Raceway Direction Changes
  • Commercial and Industrial Electrical Installations
  • Insulated Wiring Protection Applications
  • Renovation and New Construction Electrical Wiring
  • Malleable Iron Conduit Fitting Systems

Why SEPCO?

SEPCO builds its malleable iron connectors to stand up to the everyday rigors of professional electrical installation work. The insulated, 90-degree Big Bite design reflects SEPCO's focus on practical, contractor-focused conduit fitting solutions that hold up on the job site across the full 1/2" to 1" size range. Choose SEPCO for dependable, durable conduit connectors built for professional electrical applications.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Conduit Connector
Angle:
90°
Connection Type:
Big Bite
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Fittings
Product Material:
Malleable Iron

SEPCO DB5090-IC – Frequently Asked Questions

1) What trade sizes does the SEPCO DB46 90-degree Big Bite connector come in?
Four trade sizes are orderable: 3/8 inch (DB3890-IC), 1/2 inch (DB5090-IC), 3/4 inch (DB7590-IC), and 1 inch (DB10090-IC). Match the size to the conduit OD you are terminating, and order one fitting per direction change.
2) Do I need a locknut or setscrew hardware to hold conduit in the SEPCO DB46 connector?
No extra hardware is needed at the connector end. The Big Bite connector design grips the conduit end on its own, which is what makes this fitting quick to land on a run where you are already fighting for space.
3) Will the DB46 protect THHN insulation when I pull wire around the corner?
That is the point of the insulated throat. On a 90 degree fitting the conductors drag hard against the inside of the bend, and the insulated throat keeps that contact off bare metal so the conductor jacket is not abraded during the pull.
4) Is a 90-degree connector like the DB46 the right choice, or should I use a conduit elbow or pull elbow instead?
The DB46 is a connector with a 90 degree turn built in, so it both terminates the conduit and makes the direction change in one fitting. Use it where you need to turn tight against a box, wall, or obstruction and do not have room to field bend. If you have room to sweep the raceway, a bent length of conduit pulls easier than any 90 degree fitting. If you need to open the corner later to pull long runs, look for a pull-type elbow with a removable cover instead, since the DB46 is a solid connector body.
5) Can I standardize on the SEPCO DB46 across a building's electrical conduit runs?
Across the common small trade sizes, yes. The same insulated malleable iron 90 degree Big Bite connector is offered from 3/8 inch through 1 inch, so branch circuit and small feeder raceway in a facility can be fitted from one family. Above 1 inch you will need a different fitting.
6) Is malleable iron a good choice for the DB46 connector in a damp industrial space?
Malleable iron is the body material, chosen for strength and corrosion resistance in commercial and industrial conduit runs. It takes jobsite abuse better than die cast zinc fittings, which matters on exposed raceway at low mounting heights where the fitting can get struck.
7) What are the SEPCO part numbers for the 1/2 inch and 3/4 inch 90-degree insulated Big Bite connectors?
1/2 inch is DB5090-IC and 3/4 inch is DB7590-IC. The IC suffix runs across the whole 90 degree insulated group, including DB3890-IC and DB10090-IC, so quoting the number by trade size is straightforward.
How fast can I get the SEPCO DB5090-IC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO DB5090-IC come with a warranty?
Absolutely. The SEPCO DB5090-IC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO DB5090-IC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO DB5090-IC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!