SEPCO S1010 Series EMT Compres...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.65
SEPCO S1010 Series EMT Compression Connector, Zinc-Plated Steel

SEPCO S1010 Series EMT Compression Connector, Zinc-Plated Steel

(No reviews yet) Write a Review

Model: S1010

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.65
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SEPCO S1010 Series EMT Compression Connector, Zinc-Plated Steel

The SEPCO S1010 Series EMT Compression Connector joins electrical metallic tubing (EMT) conduit sections to boxes, panels, and enclosures with a secure, tight mechanical connection. Constructed from zinc-plated steel, this connector resists corrosion while providing a stable, code-compliant termination point for EMT raceways in commercial and industrial settings. The S1010 Series is available in trade sizes from 1/2" through 4", so electricians can match the connector to the conduit run at hand. The compression-style connection method creates a firm mechanical and electrical bond without relying on set screws, making it a dependable choice for demanding wiring systems where a consistent ground path and mechanical stability matter.

Key Features

  • Trade Size Range: Available in 1/2" through 4" trade sizes to fit a wide range of EMT conduit runs.
  • Durable Construction: Zinc-plated steel body resists corrosion and provides long-lasting strength in demanding electrical installations.
  • Compression Connection: A compression-style fitting delivers a tight, secure mechanical and electrical bond to EMT conduit without loose set screws that can work free over time.
  • EMT Conduit Compatibility: Purpose-built for electrical metallic tubing (EMT), helping ensure a proper fit and reliable raceway continuity along the conduit run.
  • Zinc-Plated Finish: The protective zinc coating helps guard against rust and corrosion, extending service life in typical indoor electrical environments.
  • Straightforward Installation: Designed for quick, tool-friendly installation, helping electricians and contractors maintain project timelines on conduit runs.
  • Solid Steel Body: A solid steel construction supports a rigid, dependable termination point between EMT conduit and boxes, panels, or enclosures.
  • Consistent Fit: Engineered dimensions help maintain a snug, consistent connection point across every trade size in the S1010 Series, supporting a clean and professional conduit installation.

Technical Specifications

  • Product Type: Conduit Connector
  • Trade Size: 1/2" - 4"

Typical Applications

  • Commercial and Industrial Electrical Installations
  • EMT Conduit and Raceway Systems
  • New Construction Wiring Projects
  • Conduit-to-Box and Conduit-to-Conduit Connections
  • Renovation and Retrofit Electrical Work
  • Panel, Enclosure, and Junction Box Terminations

Why SEPCO?

SEPCO builds the S1010 Series EMT Compression Connector with a zinc-plated steel body designed to deliver a secure, long-lasting connection across every trade size in the line, from 1/2" to 4". The compression-style connection method is engineered to create a dependable mechanical and electrical bond, supporting the kind of consistent performance electrical professionals expect on demanding job sites. Electrical contractors rely on SEPCO fittings for consistent quality and dependable performance from rough-in through final inspection, choosing a connector engineered to support safe, code-compliant electrical installations for commercial and industrial projects alike.

Manufacturer Resources

SEPCO Product Catalog

Product Specs

list_batch:
SEP-20260911
Product Type:
Conduit Connector
Connection Type:
Compression
Product Finish:
Zinc-Plated
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Conduit Fittings
Product Material:
Zinc-Plated Steel

SEPCO S1010 – Frequently Asked Questions

1) Can I use the SEPCO S1010 compression connector on rigid or IMC conduit, or is it EMT only?
EMT only. The S1010 Series is built for electrical metallic tubing, where the compression ring grips the smooth outer wall of the tube. Rigid and IMC are threaded conduits and need threaded fittings or a threaded-to-EMT coupling instead. If your run is EMT and you are landing it on a box, panel, or enclosure, this is the correct fitting.
2) What trade sizes does the SEPCO S1010 EMT connector come in, and which part number do I order for each?
Nine trade sizes, each its own part number: 1/2 inch is S1010, 3/4 inch is S1011, 1-1/4 inch is S1013, 1-1/2 inch is S1014, 2 inch is S1015, 2-1/2 inch is S1015D, 3 inch is S1015E, 3-1/2 inch is S1015E1, and 4 inch is S1015F. Order by the EMT trade size, not the measured outside diameter of the tube.
3) Compression or set-screw EMT connector, which should I be using?
Compression fittings like the SEPCO S1010 Series clamp a gland ring around the full circumference of the tube, so there is no screw to back off under vibration and the mechanical and electrical bond stays consistent. Set-screw connectors are faster and cheaper on dry, low-vibration indoor work. Pick compression where the ground path through the raceway matters, where the run sees vibration, or where an inspector wants the more positive termination.
4) Is a zinc-plated steel EMT connector okay outdoors or in a wet location?
The zinc-plated steel body on the S1010 Series resists rust and corrosion in typical indoor commercial and industrial electrical environments. It is not described as raintight or wet-location rated, so for outdoor, damp, or washdown runs specify a connector that carries a raintight listing for that use. Dry interior raceway, panel and junction box terminations are what this one is built for.
5) Can I mix SEPCO S1010 connectors with the steel EMT couplings and straps already on my job?
Yes. EMT trade sizes are standardized, so a 3/4 inch S1011 lands on the same 3/4 inch EMT as any other maker's 3/4 inch fitting. The zinc-plated steel body also keeps you in the same metal family as standard steel EMT fittings and straps, which avoids mixing dissimilar metals along the run. Match on trade size and you can standardize a building on the S1010 Series a few boxes at a time.
6) Is the SEPCO S1010 suitable for a conduit-to-conduit splice, or do I need a coupling?
A connector terminates EMT at a box, panel or enclosure. For joining two lengths of EMT in the middle of a run, use an EMT compression coupling, which has a compression gland on both ends instead of a threaded hub and locknut. Order the S1010 Series for terminations and the matching coupling for splices.
7) What do I need besides the connector to terminate EMT into a panel?
The S1010 Series connector includes the body, compression gland and the locknut side needed to land the fitting on a box, panel or enclosure wall, pulled up with a wrench or channel locks. You still need the knockout in the enclosure sized to the trade size you ordered, and on larger sizes the compression nut takes a wrench rather than hand tightening. For wire protection at the fitting mouth on larger runs, add a bushing per your spec.
How fast can I get the SEPCO S1010 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SEPCO S1010 come with a warranty?
Absolutely. The SEPCO S1010 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SEPCO S1010?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SEPCO S1010 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!