SharkBite U710 Push-Fit Discon...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.95
SharkBite U710 Push-Fit Disconnect Clip, DZR Brass

SharkBite U710 Push-Fit Disconnect Clip, DZR Brass

(No reviews yet) Write a Review

Model: U710

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite U710 Push-Fit Disconnect Clip, DZR Brass

The SharkBite U710 Disconnect Clip is a push-fit accessory designed for use with SharkBite push-fit fittings, letting a plumber quickly un-install a push-fit connection if a mistake is made during rough-in. This clip is available in 1/2 In. and 3/4 In. sizes to match the SharkBite push-fit fitting being serviced. SharkBite push-fit fittings are built to join copper, CPVC, or PEX tubing in any combination without glue, soldering, or crimping — simply cut the pipe, deburr, mark it at approximately 1 In. for proper insertion depth, and push the pipe to depth. The disconnect clip is part of that same push-fit system, featuring a compact, robust DZR brass body and a reusable design that supports repeat use on the same fitting.

Key Features

  • Trade Size: Available in 1/2 In. and 3/4 In. to match the SharkBite push-fit fitting it services.
  • Durable Construction: Compact, robust DZR (dezincification-resistant) brass body for long service life on push-fit connections.
  • Reusable Design: The clip is reusable, so it can be removed and reapplied as needed during service or troubleshooting.
  • Quick Disconnect Function: Disconnect clips allow for a quick un-install of the push-fit fitting if a mistake is made during installation, without cutting the pipe or fitting.
  • Easy Removal Tool: Works with an easy removal tool to simplify disassembly of the push-fit connection.
  • No Special Tools for Connection: Designed for the SharkBite push-fit system, which requires no glue, soldering, or crimping to make the initial connection.
  • Compatible Pipe Types: Supports connections made with copper, CPVC, or PEX tubing in any combination.

Technical Specifications

  • Trade Size: 1/2 In. and 3/4 In.
  • Material: DZR Brass
  • Packaging: 24 ea
  • Spec Sheet: Refer to manufacturer spec sheet for complete technical specifications.

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • Water Distribution Pipe Connections
  • Removal or Correction of SharkBite Push-Fit Fittings
  • Mixed-Material Plumbing Runs Combining Copper, CPVC, or PEX
  • Service and Repair Work on Existing Push-Fit Connections

Why SharkBite?

SharkBite push-fit fittings are engineered to reduce installation time and effort on water distribution piping by eliminating the need for glue, solder, or crimping tools. The U710 Disconnect Clip, available in 1/2 In. and 3/4 In. sizes, extends that convenience to the field, giving plumbers and contractors a reusable, DZR brass tool for cleanly backing out of a push-fit connection when a correction is needed, without damaging the pipe or fitting. Whether working on new rough-in or troubleshooting an existing push-fit joint, the disconnect clip keeps the SharkBite system fast, flexible, and repeatable across copper, CPVC, and PEX tubing combinations.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
SHK-20260923
Product Type:
Disconnect Clip
Department:
Plumbing
Product Subgroup:
Fittings
Product Material:
DZR Brass
Product Group:
Plumbing Fittings

SharkBite U710 – Frequently Asked Questions

1) How do I get a SharkBite push-fit fitting off without cutting the pipe?
The SharkBite U710 disconnect clip backs the fitting off without cutting pipe or fitting. It clips onto the connection and releases the push-fit grip, so if a fitting goes on in the wrong spot during rough-in you can pull it, reposition, and re-push. The clip itself is reusable, so the same one keeps working through repeated service and troubleshooting calls.
2) Which size SharkBite disconnect clip do I need, 1/2 or 3/4 inch?
Match the clip to the trade size of the fitting you are servicing, not the room or the run. The 1/2 inch clip is part number U710 and the 3/4 inch is U712. Plumbers carrying both sizes cover the two most common water distribution sizes on residential and light commercial rough-in.
3) Does the SharkBite U710 clip work on copper, CPVC and PEX connections?
Yes. SharkBite push-fit fittings join copper, CPVC, or PEX in any combination, and the U710 clip is part of that same push-fit system, so it works on the fitting regardless of which of those pipe materials is in it. The clip acts on the fitting's release collar, not on the pipe wall.
4) How is a disconnect clip different from a SharkBite removal tool?
They do the same job from different directions. The clip stays with the connection and is used to release that fitting, and it also works alongside an easy removal tool to simplify disassembly. If you are stocking a truck, the tool is the general-purpose option; the clips are cheap enough to leave on connections you expect to revisit, in the matching 1/2 or 3/4 inch size.
5) How does the U710 clip fit into making a SharkBite connection correctly in the first place?
The push-fit sequence is cut the pipe, deburr, mark it at about 1 inch for insertion depth, then push to depth. The clip is the undo step for that sequence: if the mark was off or the fitting landed wrong, release it and redo the joint rather than cutting the pipe back.
6) Why is the SharkBite disconnect clip made of DZR brass instead of plastic?
The U710 body is DZR (dezincification-resistant) brass, which holds up to repeated use in potable water service where plain brass can lose zinc and weaken. For a tool that lives in a service bag and gets reapplied to fitting after fitting, the metal body is what makes the reusable claim hold.
7) How do SharkBite U710 disconnect clips come packaged for a supply house or MRO stockroom?
Packaging is 24 each, which suits a shop or fleet stocking clips as a consumable alongside push-fit fittings rather than buying one at a time. Order the 1/2 inch and 3/4 inch separately to cover both trade sizes on the shelf.
How fast can I get the SharkBite U710 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite U710 come with a warranty?
Absolutely. The SharkBite U710 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite U710?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite U710 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!