Shop All Ideal Industries

Outlet Spacer/Shims 5 Pack Features Supports loose outlets Prevents broken face plates Snaps over #6, #8, #10 screws Eliminates the need to cut plate screws for “GFCI” decorator devices when installing on tile, marble, etc.

Padlock, Steel, 2" Shackle, Red Bumper Features Includes two keys 1-1/2 in. wide with 9/32 in. shackle diameter Keyed-Alike and Master-Keyed locks available by special order Rustproofed, steel case with nickel-plated shackle withstands abuse and...

PrepPRO® Coax/UTP Cable Stripper Features Works on RG-59/RG-59 Plenum/RG-6/RG-6 Plenum/RG-6 Quad/RG-6 Quad Plenum New notched coax blades offers an improved RG-59 Plenum performance Also strips UTP/STP Cat 5e/ Cat 6 (blue cartridge) Made in the USA of...

Pro-Pull™ Polypropylene Rope, 1/4", 600' Features Will not rot or mildew 1,125 tensile strength Low-friction polypropylene rope slides easily through conduit Rugged, lightweight construction Non-sliver surface can be handled without gloves

Pull Chain Lever Switch, All Angle, SPST, On-Off, Wire Leads Features 13/32 in. diameter mounting hole Use for ceiling fixtures, lamps and fans Push in connectors for #18 AWG wire Wire leads are #18 AWG, 6 in. stripped wire

Punchmaster™ II Impact Punchdown Tool Features Includes both 110 and 66 full blades – 110 (cut/no-cut), 66(cut/no cut) Includes both 110 and 66 full blades – 110 (cut/no-cut), 66 (cut/no cut) Spring loaded impact style termination seats and cuts wires...

Reflex™ Super T®-Stripper Wire Stripper Features Curved handles help reduce wrist fatigue Ergonomic design for maximum comfort Textured sleeves with extra cushioning for added comfort 6/32 and 8/32 self-chasing screw-cutting holes Overview Invented...

Reflex™ Super T®-Stripper Wire Stripper Features Curved handles help reduce wrist fatigue Ergonomic design for maximum comfort Textured sleeves with extra cushioning for added comfort 6/32 and 8/32 self-chasing screw-cutting holes Overview Invented...

Reflex™ Super T®-Stripper Wire Stripper Overview Invented and manufactured at our Sycamore, Illinois facility, the T®-Stripper Wire Stripper line is the leading brand name in the world. Designed for total comfort and wire stripping; the stripper...

Reflex™ Super 12/2 & 14/2 NM Cable T®-Stripper Wire Stripper Overview Invented and manufactured at our Sycamore, Illinois facility, the T®-Stripper Wire Stripper line is the leading brand name in the world. Designed for total comfort and wire stripping;...

RG-6 F Hex Crimp Connector -50 pk Features Industry standard 1/4” x 1/4” cable preparation Accepts RG-6 coax cables 1) Prepare RG-6 coax with a 1/4” x 1/4” strip, and fold back the braiding. Designed for use in indoor video applications Nickel plated...

RG-6 F Twist-on Connector - 10 pk Features Designed for 75Ω coaxial cables 2) Twist the connector on to the cable clockwise until the white dielectric becomes flush with the bottom of the nut. 7/16” nut diameter with 3/8-32 thread 3) Attach connector to...

RG-6 F Twist-on Connector -50 pk Features Reusable, can be removed and reused Industry standard 1/4” x 1/4” cable preparation 2) Twist the connector on to the cable clockwise until the white dielectric becomes flush with the bottom of the nut. Accepts...

RJ-11 6P4C Modular Plugs -25 pk Features Use with 1 or 2 line phone systems Primary strain relief supports to retain cable jacket and minimize conductor movement once crimped Complies with industry standard mechanical and electrical specifications for...

RTQ™ XR™ RG-6 F Compression Connector -10 pk Features Industry standard 21mm compressed length – works with non-IDEAL compression tools Accepts RG-6/RG-6 Quad/RG-6 Plenum/RG-6 Plenum Quad coax cables Designed for optimal performance on 75Ω coaxial...

Safety Lockout Hasp, 1" Jaw, 3/Card Features Rustproofed, plated and vinyl coated Allow up to six workers to lock out a single energy source

Single/Multi-Pole Lockout, 480/600V Features 480/600V lockout device designed primarily for Square D single-throw/multi-pole circuit breaker switches

SmoothStart™ Replacement Pilot Drill Features Guides cutter to surface providing smoother holes and reduced cutter damage Replacement Pilot Drill for TKO™ Carbide-Tipped Hole Cutters

Solid Wire Grounding Tail w/Loop/Ground Screw/Stripped End, Bulk Pack of 1,000 Features Safe, fast and efficient for cost-effective grounding jobs Thread-forming, hole-finding ground screw with combination Slotted, Phillips, Hex and #2 Robertson...

Solid Wire Grounding Tail, 12 AWG Solid, 8" Tail w/Loop, Ground Screw & Stripped End, Box of 1,000 Features Ensures compliance with Article 250 of the National Electric Code Thread-forming, hole-finding ground screw with combination Slotted, Phillips,...

Spacer Shims, Catepillar Design, 25 per Pack Features Eliminates the need to cut plate screws for “GFCI” decorator devices when installing on tile, marble, etc. Supports loose outlets Snaps over #6, #8, #10 screws Prevents broken face plates

Standard Drill Tap 8-Piece Kit Features Pivot Style Additional storage provided Flexible bit holder design Durable locking mechanism Rugged, durable molded plastic case

Steel Crimp Connector, Model 410 18-10 AWG, Bag of 100 Features Three models cover a wire range from 18 AWG to 4 AWG Long-zinc plated steel sleeves maximize contact area with conductors UL listed to 486C and CSA certified to C22.2 #188; comply with...

Stranded Wire Grounding Tail, 12 AWG Stranded, 8" w/#10 Fork & Stripped End, Bag of 25 Features Ensures compliance with Article 250 of the National Electric Code Thread-forming, hole-finding ground screw with combination Slotted, Phillips, Hex and #2...