View All Ives

5PB1 5 KNUCKLE, PLAIN BEARING FULL MORTISE HINGERecommended for standard weight doors; Recommended for low frequency usage; Not recommended for use with a door closer; Packed with fasteners for hollow metal and wood doors; 12-24 x 1/2 UFPHMS, 12 x 1 1/4...

701 ONE-WAY NARROW VIEWER FOR THICKER DOORS120° angle of view;For doors 2-1/8" to 2-5/8" thick;Secure, tamper-resistant one-way thread installation;Simple installation—only a 1/2" hole required;Suggested installation height: 60" from floor.IVES...

066 CASEMENT FASTENERFor use on windows to provide weather-tight fastening and security;Also ideal for securing louvered doors and small doors;Packaged with three strikes: Surface Strike (SS) Rim Strike (RS) Mortise Strike (MS);Packaged with fasteners...

508 GREENWICH COAT & HAT HOOK Decorative design is ideal for all installations;Design complements Greenwich Series pulls and levers;Surface mount;Packaged with fasteners for wood/drywall applications. IVES STOPS OVERVIEWIves supplies hooks, handrail...

7255J Center hung pivot, 500lb with bottom jamb mountMaximum door load 500 pounds;Recommended for use with 1-3/4" minimum door thickness;Not recommended for doors larger than 4'0" X 8'0";Easy installation, tilt on bearing and bearing pin;Adjustable floor...

8105 SOLD DOOR PULL - 1" FLATTENEDAvailable sizes 8", 10", 12";1/4-20 mounting hardware;Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4"...

112HD FULL MORTISE - NARROW FRAME AND DOOR LEAFFor 1 3/4" doors; Spread bearing design;Non-handed for custom cut lengths; Flush mounted, no inset; 48" Maximum door width; Beveled or square edge doors; For doors weighing up to 450 pounds without...

60/61 BASE DOOR STOPS Simple to install - only a screwdriver required;Packed disassembled for quick installation;Available in three sizes to accommodate varying areas of installation and doortrim dimensions;White rubber tip. Note: 61A - 643E/716 ships...

8190HD 90° OFFSET SOLID DOOR PULLAvailable sizes 8", 10", 12", 18";Heavy duty mounting hardware exceeds industry standards;3/8-16 mounting hardware;Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless...

430 FLOOR DOOR STOP For undercut doors up to 1-1/2"; Welded wood screws for wood applications; White rubber tip.IVES STOPS OVERVIEWWith a full line of wall bumpers, wall holders, kick down holders and hinge pin stops, Ives products are designed to ensure...

700 FULL MORTISE PIN AND BARREL CONTINUOUS HINGE - STAINLESS STEEL1/4" diameter pin with nylon self-lubricating, medical grade split bearing;For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing;1/8” Inset recommended...

8305 PULL PLATEMounting 1/4-20 mounting hardware; Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors;Comes standard with through...

COR BAR COORDINATORSThe COR Series coordinators are designed for use on pairs of doors when one door needs to close before the other;All COR units function easily. The active door lever, located nearest to the active stop, holds the active door open...

FS495 WALL STOP & AUTOMATIC HOLDERAutomatic door holders ideal for heavy-traffic situations that require a simple, holdopen device;Recommended installation is holder on door and strike on wall;Holder position on door is adjustable;Holder is tapered...

LG11 LOCK GUARD - ALUMINUM DOORS Designed for use on aluminum doors with latch-type locks or doors equipped with electric strikes;Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point;Unit is...

RL32 ROLLER LATCHRecommended light duty cabinet and closet applications;Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed;The projection of the roller is easily adjusted by...

5BB1HW SC/BSC 5 KNUCKLE, BALL BEARING, HEAVY WEIGHT FULL MORTISE HINGE Recommended for heavier weight doors (>150 lbs);Recommended for high frequency usage (400 cycles per day);Made with four ball bearing assemblies;Recommended for use with a door...

9100HD Solid push barAvailable in standard lengths of 28” and 33”.Also available in whole 1" increments from 25" to 45".Other lengths available as engineering special, consult customer service. IVES ARCHITECTURAL PULLS AND PUSH BARS...

RL38 ROLLER LATCHRim style roller latch;Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed;The projection of the roller is easily adjusted by turning slotted screw;Maximum...

600 FULL MORTISE PIN AND BARREL CONTINUOUS HINGE - STEEL1/4" diameter pin with nylon self-lubricating, medical grade split bearing;For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing;1/8” Inset recommended for 1...

8190HD 90° OFFSET SOLID DOOR PULLAvailable sizes 8", 10", 12", 18";Heavy duty mounting hardware exceeds industry standards;3/8-16 mounting hardware;Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless...

VR910M-NL/VR914M-NLClosed pull design eliminates a hooking point to be able to forcibly pull a secured door open;Ligature resistant design;For use with Von Duprin 9875/9975 mortise lock exit device;Night latch operation (cylinder not furnished);Built-in...

299AB EMERGENCY STOP ASSEMBLY - OFFSETUsed in conjunction with center hung pivots, rescue hardware allows a bi-directional door swing in emergency situations. When a patient becomes trapped behind an inward swinging door, the center long of the emergency...

349 BALL CATCH, DUAL ADJUSTABLE - ROUNDED CORNERSRecommended for lower frequency opening applications;For catch in door installations;Radiused corners allow easy installation with a router;Dual adjustment for door clearance and holding strength;Lip...