Replacement Parts

P100 Half-Mask Respirator Replacement Filters, 2-Pack Warnings Never substitute, modify, add or omit parts. Use only exact replacement parts in the configuration as specified by the manufacturer. All approved respirators shall be selected, fitted, used...

Screwdriver Replacement Bit Set Features Fits replaceable-bit screwdrivers and other sockets that accept 1/4''-hex bits. These precision-milled bits are 1'' (25 mm) in length and are 1/4'' hex. Contains 3/16'' (5 mm) and 9/32'' (7 mm) slotted plus No. 1...

Replacement Tree Climbing Gaffs Features 2-3/4-Inch (70 mm) Tree Climbing Gaffs (supplied with the 1907AR series) U.S.-made for increased durability and reliability Made in USA Includes gaffs, TORX® screws and wrench Sold in pairs only 07 - spec sheet

Replacement Blades for Wire Stripper 8 to 22 AWG Features Rust preventative applied Rustproof Replacement blades strip 8-22 AWG wire Made of 1080 high carbon steel Wire stripper tool not included Warnings NOT insulated. Plastic-dipped or slip-on...

Replacement Bits, 1/8-Inch Slotted and Schrader® Features Precision ground tips for greater strength Used for installing/removing common TR-4 Schrader® valves Custom heat-treated for long life For use with Klein's 11-in-1 Multi-bit Screwdriver (Cat. No...

Replacement Blades for Large Cable Strippers Warnings Always wear approved eye protection. NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock. Features Includes blades and...

Replacement Blades for Large Cable Strippers Warnings NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock. Always wear approved eye protection. Features Precision ground blades ensure long...

200W Solar Panel Carrying Case, Replacement Part Warnings See instruction manual for additional warnings. Features Adjustable Shoulder Strap Outside pocket to store adapters and cables Designed for the 200W Portable Solar Panel, sold separately (Cat...

Replacement Blades for Tinner Snips Features Easily replaceable cutting blades made of high-carbon steel Kit includes two blades, four 10-32 Phillips head screws with nuts and one 5/16'' (8 mm) center pivot nut Cutting capacity: 22 gauge cold-rolled...

1/4" Replacement Pilot Drill Bit 3" L Features Made of tempered high speed steel. Tri-lobe shank to prevent slipping.

Replacement Pilot Bit, 1/4 x 3-1/2-Inch Warnings Never use on or near live electrical circuits. Read and follow safety instructions in power tool owners manual. Always wear approved eye protection. Features For use with Klein arbors (Cat. Nos. 31905...

Heavy Duty Main Barrel Replacement Features Fits Klein Heavy-Duty (32557) and Ratcheting (32558) Multi-Bit Screwdriver/Nut Drivers Precision-machined for exact fit to fastener Replacement heavy duty main barrel for multi-bit screwdrivers Contains 1...

Secondary Blade Barrel Replacement Features Precision-machined for exact fit to fastener Contains 2 units Replacement heavy duty secondary blade barrel Fits Klein Heavy-Duty (32557) and Ratcheting (32558) Multi-Bit Screwdriver/Nut Drivers Warnings Do...

Extended Blade Barrel Replacement Features Contains 1 unit. Replacement extended blade barrel Fits Klein Extended-Reach (32559 & 32560) Multi-Bit Screwdriver/Nut Drivers. Precision-machined for exact fit to fastener. Warnings Always wear approved eye...

Stubby Blade Barrel Replacement Warnings Do NOT use to pry or chisel. Always wear approved eye protection. Features Contains 1 unit Precision-machined for exact fit Fits Klein's Stubby Multi-Bit Screwdriver/Nut Drivers (32561 & 32562) Stubby blade...

Replacement Bit #2 Phillips & #1 Square Features Precision-machined tips for exact fit into fastener Contains 2 bits Fits Klein Tools' 11-in 1 (Cat. No. 32500) and 11-in-1 Magnetic (Cat. No. 32500MAG) Multi-Bit Screwdriver/Nut Drivers Warnings Do NOT...

Replacement Bit #2 Square 3/16-Inch Slotted Warnings Always wear approved eye protection. Do NOT use to pry or chisel. Features 2 pack Contains #2 Square and 3/16" Slotted bits Fits Klein Heavy-Duty (32557) and Ratcheting (32558) Multi-Bit...

Replacement Bit #2 Phillips, #1 Phillips Warnings Always wear approved eye protection. Do NOT use to pry or chisel. Features Contains two #1 and #2 Phillips bits Fits Klein Extended-Reach (32559) Multi-Bit Screwdriver/Nut Driver Precision-machined...

Replacement Bit 3/16-Inch Slotted 1/4-Inch Slotted Warnings Do NOT use to pry or chisel. Always wear approved eye protection. Features 2 pack Fits Klein Extended-Reach (32559) Multi-Bit Screwdriver/Nut Driver Precision-machined tips for exact fit...

Replacement Bit #2 Square & #2 Phillips Warnings Always wear approved eye protection. Do NOT use to pry or chisel. Features Fits Klein Extended-Reach (32560) Multi-Bit Screwdriver/Nut Driver Tip sizes - #2 Square and #2 Phillips Contains two (2)...

Replacement Bit #1 Square, 1/4-Inch Slotted Warnings Always wear approved eye protection. Do NOT use to pry or chisel. Features Contains two (2) bits Tip sizes - #1 Square and 1/4"Slotted Precision-machined tips for exact fit into fastener Fits Klein...

Replacement Bit, #2 Phillips, 9/32-Inch Slotted Features Contains 1 bit 5/16" Hex Shank Fits 5-in-1 Screwdriver/Nut Driver (32476) and 4-in-1 Screwdriver (32460) Precision-machined tips for exact fit into fastener Warnings Always wear approved eye...

Replacement Bit. #1 Phillips, 3/16-Inch Slotted Warnings Do NOT use to pry or chisel. Always wear approved eye protection. Features Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers Contains 2 bits Precision-machined tips for exact...

Replacement Bit #1 Square & #2 Square Features Made in the USA Contains 2 bits Precision-machined tips for exact fit into fastener Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers Warnings Do NOT use to pry or chisel. Always wear...