Shop All Klein Tools

Grip for Weatherproof Wire 0.53-Inch Capacity Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Always match proper size and type of grip to application. Before each use, clean...

Grip for Weatherproof Wire 0.74-Inch Capacity Note Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable Features Made in USA Weatherproof Works on 0.53 to 0.74-Inch (13.46 to 18...

Chicago® Grip for Weatherproof Wire Note Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable Features Weatherproof Notches in jaw provide firm grip on insulation Works with 0...

Chicago® Grip for Bare Wire Warnings Always match proper size and type of grip to application. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Grips are to be used for temporary installation, not for permanent...

Chicago® Grip for Bare Copper Wire Warnings Grips are to be used for temporary installation, not for permanent anchorage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Always match proper size and type of grip to...

Grip for High Strength Cables 0.37-Inch Features Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable Works with aircraft, EHS, messenger and guy strand cable Sawtooth profile...

Chicago® Grip with Latch 0.37-Inch Cable Features For larger conductors, see our grips with round inside-jaw contour Sawtooth profile provides extra gripping power Double V grooves give four-point contact, reducing chance of slipping and providing...

Chicago® Grip Hot Latch for Copper Wire Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. Do not exceed rated capacity...

Haven's® Grip for Wire Rope 0.75-Inch Features Max Safe Load of 8000-Pound (3629 kg) Made in USA Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area Designed for use when light, compact grip is desired and where conductor...

Haven's® Grip for Wire Rope 1-Inch Warnings Always match proper size and type of grip to application. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Before each use, clean jaw area and inspect grip for proper...

Haven's® Grip Wire Pulling Tool, 1-1/4-Inch Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Always match proper size and type of grip to application. Grips are to be used for temporary installation, not for...

Haven's® Grip for Wire Rope 0.88-Inch Features Swing latch helps hold cable in the jaw Designed for use when light, compact grip is desired and where conductor damage is not a factor Made in USA Works on 0.38 to 0.88-Inch (9.65 to 22.35 mm) wire rope...

Grip for High Strength Cables 0.62-Inch Warnings Grips are to be used for temporary installation, not for permanent anchorage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Before each...

Chicago® Grip Bell-System Type H Grip Features Outside diameter of support wire includes thickness of polyethylene coating H" Strand Puller -- Equipped with a Chain, Toggle and Shackle Made in USA Equipped with chain, toggle and shackle For support wire...

Chicago® Grip for Large Diameter Conductors Features These non-returnable grips are special order only. Please allow 30 days for delivery. Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's...

Grip for High Strength Cables 0.5 to 0.75-Inch Features Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable For larger conductors, see our grips with round inside-jaw contour Made in...

Chicago Grip, 0.75 to 1-Inch High Strength Cables Warnings Do not exceed rated capacity. Always match proper size and type of grip to application. Grips are to be used for temporary installation, not for permanent anchorage. When used on/near energized...

Chicago® Grip for Conductors 20K-Pound Load Features These grips are special order only, please allow 30 days for delivery, not returnable -- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's...

Chicago® Grip for Conductors 25K-Pound Load Features Manufactured from drop-forged, heat-treated steel for excellent durability Made in USA These grips are special order only, please allow 30 days for delivery, not returnable -- Orders must specify...

Chicago® Grip - Dual Conductor Trans Features Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable Specially milled jaws for the Vibration Resistant twin conductor Grips maintain temporary...

Grip for Large Diameter Conductors Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Grips are to be used for temporary installation, not for permanent anchorage. Always match proper size and type of grip to...

Wide Range Distribution Grip Features One-Handed Grip Patent pending design Max Safe Load of 5000-Pound (2268 kg) Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks One-handed design makes for easier...

Wide Range Distribution Grip with Hot Latch Warnings Always match proper size and type of grip to application. Grips are to be used for temporary installation, not for permanent anchorage. Do not exceed rated capacity. Before each use, clean jaw area...

Wide Range Distribution Grip, EHS Wire Features Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks Patent pending design One-Handed Grip Alternating sawtooth jaw geometry provides greater grip...