View All Klein Tools

36-Inch Round Bar with Tether Hole Warnings Always wear approved eye protection. Features Tether not included Cross Hole with No Sharp Edges for Tethering Cross hole with no sharp edges for tethering when working at height Made in USA Chisel end is...

24-Inch Round Bar Warnings Always wear approved eye protection. Features Made in the USA 24 in. (610 mm) length Forged fit-up bar is pointed on one end Provides extra leverage when positioning steel members and aligning bolt holes Chisel-end is at a...

Multi-Bit Screwdriver / Nut Driver, 5-in-1, Phillips, Slotted Bits Warnings NOT insulated. Will NOT protect against electrical shock. Always wear approved eye protection. Do NOT use to pry or chisel. Features The following replacement bits are...

10-in-1 Multi-Bit Screwdriver / Nut Driver (12-Pack) Features The following replacement bits are available - see Cat. No. 32482 (#1 Phillips and 3/16'' [5 mm] Slotted), Cat. No. 32483 (#2 Phillips and 1/4'' [6 mm] Slotted), Cat. No. 32484 (#1 Square and...

Bit for 32476 and 32460, #1 PH 3/16-Inch SL Features Precision-machined tips for exact fit into fastener Contains 1 bit Fits 5-in-1 Screwdriver/Nut Driver (32476) and 4-in-1 Screwdriver (32460) Warnings Do NOT use to pry or chisel. Always wear...

Replacement Bit, #2 Phillips, 9/32-Inch Slotted Features Contains 1 bit 5/16" Hex Shank Fits 5-in-1 Screwdriver/Nut Driver (32476) and 4-in-1 Screwdriver (32460) Precision-machined tips for exact fit into fastener Warnings Always wear approved eye...

Connecting Bar, 7/8-Inch Round by 30-Inch Long Features Other hex bar sizes sold separately Made in USA Chisel-end is at a 15-degree angle to give even greater leverage Provides extra leverage when positioning steel members and aligning bolt...

Replacement Bit #10 TORX® & #15 TORX® Features Precision Machined Tips for Exact Fit into Fastener Precision-machined tips for exact fit into fastener TORX® is a registered trademark of Acument Intellectual Properties, LLC Contains 2 bits Fits the...

Multi-Bit Screwdriver / Nut Driver, 11-in-1, Ph, Sl, Sq, Combo Bits Warnings Do NOT use to pry or chisel. NOT insulated. Will NOT protect against electrical shock. Always wear approved eye protection. Features Custom heat-treated for long...

1-1/16-Inch Standard Bull Pin, 15-Inch Features Standard design offers greater initial economy, but no added protection against mushrooming Heat-treated for strength Made in USA Black finish for rust resistance Machined from quality alloy...

Multi-Bit Screwdriver / Tap Tool, 14-Piece Warnings Do NOT use to pry or chisel. NOT insulated. Will NOT protect against electrical shock. Always wear approved eye protection. Features Multi-bit screwdriver / tap tool increases job speed by combining...

Replacement Tap, Double-Ended, for Cat. No. 32517 Features Precision-machined for durability and long life Six common tap sizes (6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20) Replacement tap for the Multi-Bit Tap Tool Driver (Cat. No. 32517) Each tap size...

1-3/16-Inch Standard Bull Pin 15-Inch L Warnings OSHA 1926.301 (c) specifically states: "Impact tools, such as drift pins, wedges and chisels, shall be kept free of mushroomed heads." Always wear approved eye protection. Features Made in...

Tamperproof Bit Set, 32 Piece Features Industrial strength, heat-treated steel bits for long-lasting use Includes 3/32-Inch, 7/64-Inch, 1/8-Inch, 9/64-Inch, 5/32-Inch, and 3/16-Inch Fraction Hex bits TORQ-SET® bits included - 6, 8 and 10 Assembled in...

Standard Tip Bit Set, 32-Piece Warnings Always wear approved eye protection. Do NOT use to pry or chisel. Features Includes 1/4-Inch square to 1/4-Inch hex adaptor to drive sockets Block slides over most screwdriver shafts for easy bit access and...

Multi-Bit Screwdriver / Nut Driver, 11-in-1, Ph, Sl, Sq, Schrader Bits Warnings Always wear approved eye protection. NOT insulated. WILL NOT protect against electrical shock. Do NOT use to pry or chisel. Features Great for HVAC and other industrial...

KNECT™ Impact-Rated HVAC Screwdriver / Nut Driver, 11-in-1 Features Cushion-Grip™ handle for greater torque and comfort Includes bit for installation/removal of common TR-4 Schrader™ valves and aggressive thread extractor tip for backing out broken...

Schrader® Valve Core Replacement Bit Warnings Never use on or near live electrical circuits. Always wear approved eye protection. Do NOT use to pry or chisel. Features Double-sided replacement bit Made of high quality tempered steel Package quantity...

10 Fold Screwdriver with Schrader Valve Core Features Each arm contains four interchangeable bit-styles and two nut drivers. The quick release button easily unlocks a fully extended driver arm. Fits easily into your pocket. Unfold each driver arm up to...

10-Fold Screwdriver / Nut Driver, TORX® Features Contains 5/16-Inch & 1/4-Inch nut drivers, T6, T7, T8, T10, T15, T20, T25, T27 TORX Blast finish steel bits provide a firm hold to the fastener to reduce cam-out Folds for Easy Storage TORX® is a...

10-Fold Screwdriver / Nut Driver, Tamperproof TORX® Warnings Always wear approved eye protection. Never use on or near live electrical circuits. Do NOT use to pry or chisel. Features TORX® is a registered trademark of Acument Intellectual Properties,...

10-Fold Screwdriver / Nut Driver, Fractional Hex Features Contains 5/16-Inch & 1/4-Inch nut drivers, 1/16-Inch, 5/64-Inch, 3/32-Inch, 7/64-Inch, 1/8-Inch, 9/64-Inch, 5/32-Inch, 3/16-Inch standard hex Unfolds and locks at a 180-degree angle to provide a...

10-Fold Screwdriver / Nut Driver, Metric Hex Features Unfolds and locks at a 180-degree angle to provide a straight screwdriver Folding pocket-style 10-in-1 tool with interchangeable bits Features 8 screwdriver sizes and 2 nut drivers Contains 5/16-Inch...

Replacement Bit, Tamperproof TORX® #7 and #8 Features TORX® is a registered trademark of Acument Intellectual Properties, LLC Contains two (2) bits with TT7 and TT8 TORX® tips Fits all Klein Tools 2-in-1 (67100), 10-in-1 (32477), 11-in-1 (32500) and...