Sioux Chief 553-026 26" ZipSti...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.91
Sioux Chief 553-026 26" ZipStick Gray Pipe Riser Stake

Sioux Chief 553-026 26" ZipStick Gray Pipe Riser Stake

(No reviews yet) Write a Review

Model: 553-026

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 553-026 26" ZipStick Gray Pipe Riser Stake

The Sioux Chief 553-026 ZipStick is a 26" rough-in support stake used to hold a pipe stub-out or riser plumb and at the correct height while framing is open and before the wall is closed in. Plumbers drive the stake into place near the rough-in location and zip-tie or strap the riser tubing to the stick, keeping the pipe steady and properly positioned through rough-in inspection. Finished in gray for easy identification on the jobsite, this Sioux Chief stake is manufactured in the United States and packaged 50 per case for efficient rough-in stocking. Keeping risers held to blueprint height and plumb before drywall goes up helps rough-in crews avoid re-work once walls are closed and finish plumbing is set.

Key Features

  • Stake Length: 26" size supports common rough-in riser heights from floor or slab to wall penetration.
  • Riser Positioning: Holds pipe stub-outs plumb and in place while walls are open, keeping the rough-in location steady for inspection.
  • Zip-Tie Ready: Riser tubing is secured to the stick with zip ties or strapping rather than fasteners driven into finished framing.
  • Gray Finish: Gray color for quick visual identification among rough-in materials on the jobsite.
  • Case Packaging: Sold 50 per case (EA) for efficient rough-in stocking and job costing.
  • Made in the USA: Manufactured in the United States.
  • Jobsite Workflow: Marks and holds each riser location for the rough-in inspector while framing is still open, then is removed once permanent bracing takes over.

Technical Specifications

  • Country of Origin: United States
  • Packaging: 50 EA per case
  • Cubic Volume: 1.357 (per unit, for freight and shipping calculations)
  • Color: Gray
  • Length: 26"

Typical Applications

  • Pipe Riser Positioning During Rough-In
  • Stub-Out Staging Before Wall Closure
  • New Construction Plumbing Rough-In
  • Residential and Commercial Remodel Framing
  • Jobsite Organization of Open-Wall Rough-In Materials
  • Riser Support Ahead of Rough-In Inspection

Why Sioux Chief?

Sioux Chief builds rough-in plumbing supplies that hold up to the pace of a real jobsite, and the 553-026 ZipStick is no exception, giving plumbers a simple, purpose-built way to keep pipe risers plumb and secure until the wall closes in. Manufactured in the United States and packaged 50 per case, it is sized to stock efficiently on rough-in trucks and at the shop. Choose Sioux Chief for dependable behind-the-wall rough-in supplies built for professional plumbing crews, and stock the 553-026 ZipStick alongside other Sioux Chief rough-in essentials for consistent results from framing through final trim.

Manufacturer Resources

Sioux Chief Product Catalog

Product Specs

Product Type:
Pipe Riser Stake
Country Of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Hangers and Supports
Product Color:
Gray
Product Size:
26"

Sioux Chief 553-026 – Frequently Asked Questions

1) What is a Sioux Chief ZipStick stake actually used for on a plumbing rough-in?
The Sioux Chief 553-026 ZipStick is a 26 inch stake that holds a pipe stub-out or riser plumb and at the right height while the wall is still open. The plumber sets the stake near the rough-in location and zip-ties or straps the riser tubing to it, so the pipe stays put through rough-in inspection. Once permanent bracing takes over, the stick comes out.
2) Will a 26 inch ZipStick be long enough for my stub-out height?
At 26 inches the 553-026 covers common rough-in riser heights running from the floor or slab up to the wall penetration. If your riser has to be held higher than that, you need a longer stick, not this one.
3) Is the ZipStick a permanent pipe support or does it get removed?
It is a temporary rough-in aid, not a permanent hanger. The stake marks and holds each riser location while framing is open and through inspection, then comes out once permanent bracing or strapping carries the pipe. For the finished installation you still need proper hangers and supports.
4) Do I need screws or clamps to attach the pipe to the ZipStick?
No fasteners into framing are needed. The riser tubing is secured to the stick with zip ties or strapping, which is why it works on open-wall rough-ins where you do not want to drive hardware into finished framing.
5) Is the Sioux Chief ZipStick made in the USA for a Buy American job?
Country of origin on the 553-026 ZipStick is the United States, so it fits domestic-sourcing requirements on public and institutional work.
6) How many Sioux Chief 553-026 ZipSticks come in a case?
Packed 50 each per case, which is how most rough-in crews stock them on the truck or at the shop for job costing.
7) What is the Sioux Chief part number for the 26 inch gray ZipStick?
Order it as Sioux Chief 553-026. That number covers the 26 inch gray ZipStick riser stake.
8) Why is the ZipStick gray, and does the color mean anything?
Gray is the finish on the 553-026, used for quick visual identification among the pile of rough-in material on a jobsite. It carries no rating or function, it just makes the stakes easy to spot.
How fast can I get the Sioux Chief 553-026 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 553-026 come with a warranty?
Absolutely. The Sioux Chief 553-026 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 553-026?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 553-026 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!