Sioux Chief 600 Sweat Coupling...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.85
Sioux Chief 600 Sweat Coupling, Type L Copper Tube Repair Fitting

Sioux Chief 600 Sweat Coupling, Type L Copper Tube Repair Fitting

(No reviews yet) Write a Review

Model: 600-212PK

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.85
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sioux Chief 600 Sweat Coupling, Type L Copper Tube Repair Fitting

The Sioux Chief 600 is a full-slip sweat coupling built for fast, clean repairs on Type L copper tube supply lines, available in nominal sizes of 1/2" and 3/4" to cover the two most common residential and light commercial supply-line diameters. Rather than seating against an internal stop like a standard coupling, the 600 slips fully over both pipe ends, which lets plumbers and service techs bridge freeze-burst or otherwise damaged copper runs even when the cut ends are slightly misaligned or out of tolerance. Each coupling measures 12" in overall length, giving installers enough reach to span a damaged section of copper tube in a single piece instead of assembling multiple short couplings and unions. The 600 is manufactured in the United States and ships in cartons of 10 EA, making it a practical item for plumbing wholesalers, contractors, and service trucks to keep stocked for emergency repair calls. As a sweat-type fitting, the 600 is intended for solder connection to Type L copper tube, consistent with standard copper supply-line joining practice.

Key Features

  • Trade Size: available in 1/2" and 3/4" nominal sizes, sized for Type L copper tube supply line repair.
  • Length: 12" overall length, allowing a single coupling to bridge longer damaged sections of copper pipe.
  • Full Slip Design: slips fully over both pipe ends for quick, easy repairs on freeze-burst or damaged copper supply lines without cutting back additional pipe.
  • Connection Type: sweat/solder connection for joining to Type L copper tube using standard soldering technique.
  • Material: copper construction compatible with Type L copper tube systems.
  • Country of Origin: manufactured in the United States.
  • Packaging: supplied in cartons of 10 EA for efficient stocking and distribution.

Technical Specifications

  • Country of Origin: United States
  • Size Range: 1/2" and 3/4"
  • Packaging: 10 EA per carton

Typical Applications

  • Repair of Freeze-Burst Copper Supply Lines
  • Residential and Light Commercial Copper Pipe Service Work
  • Rough-In Repair of Type L Copper Tube Runs
  • Plumbing Truck and Service Stock for Emergency Repairs
  • Joining Damaged Copper Sections Without Full Line Replacement

Why Sioux Chief?

Sioux Chief designs rough-in plumbing fittings like the 600 sweat coupling for the realities of field repair work, where a full slip design and a longer 12" body let plumbers restore damaged copper supply lines quickly and reliably in either 1/2" or 3/4" sizing. Manufactured in the United States and packaged in repair-ready quantities of 10 EA, this coupling is built to be a dependable, straightforward solution for copper tube service calls.

Manufacturer Resources

Product Specs

Product Type:
Coupling
Connection Type:
Sweat
Country of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Material:
Copper
Product Size:
3/4"

Sioux Chief 600-212PK – Frequently Asked Questions

1) What is a full-slip coupling, and how is it different from a regular copper coupling?
A standard copper coupling has an internal stop that the pipe ends butt against, which means both ends have to land in the right place. The Sioux Chief 600 has no stop, so it slides fully over both pipe ends. You can push it clear onto one side, position it over the damaged area, then slide it back, which is what makes it work on a repair where the cut ends are slightly misaligned or out of tolerance.
2) Is the Sioux Chief 600 a solder fitting or a push-fit?
It is a sweat fitting, soldered in place. The body is copper and it joins to Type L copper tube with standard soldering technique, so you will need flux, solder and a torch on site. There is no gasket or push connection on it.
3) What copper tube does the 600 coupling fit?
It is sized for Type L copper tube in 1/2 inch and 3/4 inch nominal, the two most common residential and light commercial supply line diameters. Sizing on copper fittings is by nominal tube size, so a 1/2 inch 600 goes over 1/2 inch nominal Type L.
4) Will this work on Type M or Type K copper?
The 600 is specified for Type L copper tube. Type L, M and K of the same nominal size share the same outside diameter, so a sweat fitting seats on any of them, but Sioux Chief calls this one out for Type L supply line repair and that is the application it is sold for.
5) How many come in a carton, and is this something worth stocking on a service truck?
The 600 ships in cartons of 10 each. For a service outfit running emergency calls, that is the point of the item: keep a box of 1/2 inch and a box of 3/4 inch on the truck and a burst line gets bridged in one piece without a trip back for couplings and unions.
6) Is the Sioux Chief 600 made in the USA?
Yes, the 600 sweat coupling is manufactured in the United States, which matters if you are buying against a domestic-content requirement on a public or institutional job.
How fast can I get the Sioux Chief 600-212PK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 600-212PK come with a warranty?
Absolutely. The Sioux Chief 600-212PK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 600-212PK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 600-212PK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!