Sioux Chief 630VG248 PEXpress ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$13.47
Sioux Chief 630VG248 PEXpress Type L Copper No-Lead Stub-Out Elbow

Sioux Chief 630VG248 PEXpress Type L Copper No-Lead Stub-Out Elbow

(No reviews yet) Write a Review

Model: 630VG248

In Stock (leaves warehouse same day if ordered before 3pm ET)

$13.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Sioux Chief 630VG248 PEXpress Type L Copper No-Lead Stub-Out Elbow

The Sioux Chief 630VG248 is a Type L copper tube stub-out elbow sized 1/2" PEXpress x 3-1/2" x 8", built for rough-in connections where PEX tubing needs to transition to a rigid, code-ready copper stub behind the wall. The fitting is manufactured to NL/DZR (no-lead, dezincification-resistant) requirements, and the copper tube leg accepts sweat, push-fitting, or compression valves on the finished end, giving the installer flexibility in how the final fixture connection is made. On the PEXpress side, the fitting connects directly to PEX tube using any ASTM F3347 PEXpress fitting with a properly calibrated press sleeve tool, eliminating the need for a separate crimp ring or cinch clamp at that joint. This stub-out elbow is intended for professional plumbing installers working on new construction or renovation rough-in where a clean, solid stub-out is needed for a future fixture supply connection.

Key Features

  • Trade Size: 1/2" PEXpress x 3-1/2" x 8" configuration for stub-out rough-in applications.
  • Durable Construction: Type L copper tube construction for a rigid, long-lasting stub-out leg.
  • PEXpress Connection: Connects PEX tube to any ASTM F3347 fitting using a properly calibrated press sleeve tool, giving a secure press-fit joint without crimp rings.
  • Finished-End Versatility: Copper tube end accepts sweat, push-fitting, and compression valves, so the installer can choose the termination method that fits the job.
  • No-Lead / DZR: Manufactured to NL/DZR specifications for use where no-lead, dezincification-resistant fittings are required.

Certifications & Compliance

  • NL/DZR (No-Lead, Dezincification-Resistant)
  • Compatible with ASTM F3347 PEXpress fittings

Technical Specifications

  • Country of Origin: United States
  • Cubic Volume: 0.3789265
  • Packaging: 25 EA

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • PEX-to-Copper Fixture Stub-Outs
  • New Construction Plumbing Rough-In
  • Renovation and Remodel Supply Connections
  • Behind-the-Wall Fixture Supply Preparation

Why Sioux Chief?

Sioux Chief builds this stub-out elbow from Type L copper tube to NL/DZR specifications, giving installers a reliable transition point between PEX tubing and the sweat, push-fit, or compression valve connections used at the fixture. The PEXpress connection, compatible with ASTM F3347 fittings and a properly calibrated press sleeve tool, delivers a secure, repeatable rough-in joint for professional plumbing crews.

"

Manufacturer Resources

Product Specs

Product Type:
Stub-Out Elbow
Connection Type:
Press
Standards:
ASTM F3347
Country of Origin:
United States
Department:
Plumbing
Product Group:
Rough-In and Supports
Product Subgroup:
Fittings and Valves
Product Material:
Copper
Product Size:
1/2" x 3-1/2" x 8"

Sioux Chief 630VG248 – Frequently Asked Questions

1) Does the Sioux Chief 630VG248 stub-out elbow need a crimp ring or cinch clamp on the PEX side?
No. The PEXpress side presses directly onto PEX tubing with a properly calibrated press sleeve tool, so there is no separate crimp ring or cinch clamp at that joint. The connection type is press, and it works with any ASTM F3347 PEXpress fitting system. You do need the press sleeve tool calibrated for that system, so crews running crimp-ring tooling only will not be able to make this joint.
2) What size is the Sioux Chief 630VG248 PEXpress stub-out elbow?
It is a 1/2 inch PEXpress x 3-1/2 inch x 8 inch configuration. The short 3-1/2 inch leg and the 8 inch copper leg give you the geometry for a standard behind-the-wall fixture stub-out, with enough copper projecting past the finished wall to trim and terminate at the valve.
3) Can I solder a stop valve onto the copper end of the 630VG248, or do I have to use a push fitting?
Either works. The copper tube leg accepts sweat, push-fit, or compression valves, so you can solder a stop on, push one on, or run a compression nut and ferrule. That choice is yours at trim-out and does not change anything about the PEX side of the fitting.
4) Is the 630VG248 stub-out elbow lead free for potable water rough-in?
The fitting is manufactured to NL/DZR requirements, meaning no-lead and dezincification-resistant, which is what jurisdictions call for on potable water supply fittings. Copper is the body material.
5) Is this a Type L copper stub-out or thinner Type M?
The Sioux Chief 630VG248 uses Type L copper tube for the stub leg. Type L is the heavier wall of the two common water tube grades, which is what you want on a leg that sits exposed behind the wall and gets handled during drywall, trim, and valve installation.
6) How does a PEXpress stub-out elbow compare to just running PEX to a drop-ear elbow and a brass adapter?
A stub-out elbow does the transition and the rigid termination in one piece: PEX presses on behind the wall and a solid copper leg comes out through the finish, ready for the stop valve. Running PEX to a drop-ear plus an adapter means more joints in the wall cavity and no rigid copper to support the trim. Choose the stub-out where you want the finished end fixed and plumb and the valve mounted on copper rather than on plastic tubing.
7) How many 630VG248 stub-out elbows come in a box?
Packaging is 25 each per box, which is how it is sold for rough-in work where a crew is setting multiple fixture supplies on the same trip. The fitting is made in the United States.
How fast can I get the Sioux Chief 630VG248 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sioux Chief 630VG248 come with a warranty?
Absolutely. The Sioux Chief 630VG248 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sioux Chief 630VG248?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sioux Chief 630VG248 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!