Sioux Chief 878-60 6" PVC Slotted Plug with Insert

Sioux Chief 878-60 6" PVC Slotted Plug with Insert

The Sioux Chief 878-60 is a 6" PVC slotted plug with insert, built to cap the end of a drain-waste-vent pipe run during rough-in work. The slotted head lets a plumber drive the plug in and back it out again with a standard flat-blade screwdriver, so the same fitting can be removed for a later air or water test rather than cut out and replaced. The included insert seats inside the plug body to help it hold a tight, secure fit against the inner wall of the pipe. Molded in PVC for a lightweight, corrosion-resistant fit on DWV lines, the 878-60 is manufactured in the United States and packaged 8 EA per carton, a case count sized for distributors and contractors who keep rough-in stock on hand rather than special-ordering one plug at a time.

Key Features

• Trade Size: 6" nominal size, sized to cap 6" DWV pipe runs during rough-in and close-in.
• PVC Construction: a lightweight, corrosion-resistant PVC body suited to drain-waste-vent piping behind the wall or under the slab.
• Slotted Head: the slotted face lets the plug be seated and backed out again with a common flat-blade screwdriver, so it does not have to be cut free.
• Insert Included: a separate insert ships with the plug and seats inside it for a secure, snug fit against the pipe wall.
• Reusable by Design: because it is removable rather than solvent-welded permanently in place, the same plug can be pulled and reset if a line needs to be reopened.
• Country of Origin: manufactured in the United States.
• Packaging: sold 8 EA per carton, a case pack built for rough-in supply houses and plumbing contractors stocking shelf inventory.

Technical Specifications

• Trade Size: 6".
• Material: PVC.
• Configuration: Slotted head with insert.
• Country of Origin: United States.
• Packaging Quantity: 8 EA per carton.

Typical Applications

• Capping DWV Pipe Ends During Rough-In
• Removable Cleanout and Test Plug Applications
• Residential and Commercial Rough-In Plumbing
• New Construction and Remodel Projects
• Distributor and Contractor Stock Replenishment

Why Sioux Chief?

Sioux Chief molds the 878-60 from PVC and manufactures it in the United States, giving rough-in crews a straightforward, screwdriver-serviceable plug for finishing DWV pipe runs without permanently solvent-welding a fitting in place. The slotted head and included insert keep the plug simple to seat, remove, and reset, and the 8 EA carton pack makes it easy for supply houses and plumbing contractors to keep this common rough-in item on the shelf.