Spears 2" Schedule 80 Socket C...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$28.83
Spears 2" Schedule 80 Socket Cap

Spears 2" Schedule 80 Socket Cap

(No reviews yet) Write a Review

Model: 847-020C

In Stock (leaves warehouse same day if ordered before 3pm ET)

$28.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Spears 847-020 2" Schedule 80 PVC Socket-Weld Cap Fitting

The Spears 847-020 is a 2" Schedule 80 PVC cap engineered for socket (SOC) solvent-weld connections in pressure piping and rough-in plumbing systems. Molded in solid PVC with a heavy Schedule 80 wall section, this fitting is built to cap and permanently dead-end a 2" pipe run. As a socket-style fitting, the 847-020 slips over the outside diameter of 2" PVC pipe for a solvent-cement joint, giving plumbers and contractors a straightforward way to terminate a branch or main line without introducing a threaded connection into the system. Whether used in new construction or retrofit work, this Schedule 80 cap provides a secure, permanent termination point for 2" PVC piping without a mechanical or threaded joint that could work loose over time.

Key Features

  • Trade Size: Sized for 2" PVC pipe, matching standard 2" socket dimensions for a proper solvent-weld fit.
  • Schedule 80 Construction: Heavy-wall PVC molding provides greater strength and impact resistance than lighter Schedule 40 fittings, suited to demanding pressure piping runs.
  • Socket (SOC) End Connection: Solvent-weld socket accepts 2" PVC pipe for a permanent, cemented joint rather than a threaded connection.
  • Cap Configuration: Closes and permanently seals the end of a 2" pipe run in a single fitting, eliminating the need for a plug or additional adapters.
  • PVC Material: Corrosion- and chemical-resistant PVC construction suited to plumbing, irrigation, and industrial piping systems.
  • Solvent-Weld Installation: Designed for standard PVC solvent cement installation practices used throughout Schedule 80 piping systems, keeping the cap consistent with the rest of the run.
  • Dead-End Termination: Provides a clean, permanent stop point for a 2" branch or main line where no further pipe extension is needed.

Technical Specifications

  • Product Type: Cap
  • Product Material: PVC
  • Product Size: 2"

Typical Applications

  • Capping and Dead-Ending 2" PVC Pipe Runs
  • Schedule 80 PVC Pressure Piping Systems
  • Residential and Commercial Rough-In Plumbing
  • Industrial and Process Piping Installations
  • Irrigation and Water Distribution Systems
  • New Construction, Repair, and Retrofit Projects

Why Spears?

Spears Manufacturing is a longstanding producer of PVC, CPVC, and industrial thermoplastic pipe, fittings, and valves used throughout plumbing and process piping systems. The 847-020 cap's solid PVC construction and Schedule 80 socket design reflect Spears' focus on dependable, solvent-weld fittings built for demanding rough-in and pressure piping applications. Spears fittings are manufactured to consistent tolerances, helping ensure a reliable solvent-weld fit with mating Schedule 80 PVC pipe and fittings throughout a piping system. When a 2" PVC pipe run needs to be permanently capped, the 847-020 gives plumbers and contractors a straightforward, code-standard Schedule 80 solution to finish the job without adding a threaded or mechanical joint to the system.

Manufacturer Resources

Product Specs

Department:
Plumbing
Product Type:
Cap
Connection Type:
Socket
Product Group:
PVC & CPVC Fittings
Product Subgroup:
Fittings and Valves

Spears 847-020C – Frequently Asked Questions

1) Does the Spears 847-020 cap glue over the pipe or fit inside it?
It's a socket fitting, so the cap slips over the outside diameter of 2 inch PVC pipe and is joined with solvent cement. There is no thread and nothing inserts into the pipe bore. Cut the pipe square, dry-fit to confirm the socket bottoms out, then prime and cement as you would any Schedule 80 socket joint.
2) Can I use a Schedule 80 cap on Schedule 40 2 inch PVC pipe?
Yes. Schedule 40 and Schedule 80 2 inch pipe share the same outside diameter, so a 2 inch Schedule 80 socket cap solvent-welds onto Schedule 40 pipe. The difference is wall thickness: the Schedule 80 cap has the heavier wall section, giving more strength and impact resistance than a Schedule 40 fitting. The pressure rating of the finished line is still governed by the weakest part, which would be the Schedule 40 pipe.
3) Should I use a socket cap or a threaded plug to dead-end a 2 inch PVC line?
Use the socket cap when the termination is permanent. It cements onto the pipe end as one piece, with no threaded joint that can weep or work loose, and it needs no plug or adapter. Choose a threaded plug and female adapter instead if you need to open that end later for cleanout, testing, or a future branch, since a cemented cap has to be cut off to remove it.
4) I need to cap a 2 inch chemical line. Is PVC the right material?
PVC is corrosion and chemical resistant and is used widely in industrial and process piping, so it handles many chemical services. Temperature is the deciding factor more often than chemistry: CPVC handles higher operating temperatures than PVC, which is why the same 2 inch Schedule 80 cap is offered as 847-020C in CPVC. Pick the material that matches the pipe and the service already specified for the line.
5) What do I need besides the cap to finish a 2 inch Schedule 80 pipe termination?
Just the cap and solvent cement. The cap closes the run in one fitting, so no plug, bushing, or adapter is required. You'll want primer and the cement rated for your material, PVC cement for the 847-020 and CPVC cement for the 847-020C, plus a square cut and deburred pipe end.
6) Do I need a different cap for gray Schedule 80 versus white Schedule 40 fittings in the same system?
No, the 2 inch socket cap mates with standard 2 inch socket dimensions, so it joins any 2 inch PVC pipe regardless of whether the neighboring fittings are Schedule 40 or 80. Spears holds consistent socket tolerances for a reliable solvent-weld fit with mating Schedule 80 PVC pipe and fittings. Keep material consistent though: cement a PVC cap to PVC and the 847-020C to CPVC.
How fast can I get the Spears 847-020C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears 847-020C come with a warranty?
Absolutely. The Spears 847-020C is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears 847-020C?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Spears 847-020C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!