Spud Wrench 1-1/4-Inch Nominal Opening for Heavy Nut
3212 - spec sheet
Warnings
- Do NOT extend handle length.
- Do NOT push or hammer wrench.
- Always wear approved eye protection.
Features
- Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification
- Extra-large hub area works on larger diameter holes better than other wrenches
- Extra Heavy-Duty Head for Maximum Strength
- Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding
- American Bridge design
- Forged in the USA from select US alloy steel to withstand high-leverage and heavy loads
- Nominal Opening: 1-1/4-Inch (31.8 mm)
- Extra heavy-duty head area gives maximum strength and durability
3212 - spec sheet
Manufacturer Resources
Product Specs
- Depth:
- 16.6250 in
- Finish:
- Black Oxide with a Rust Preventative
- Head Width:
- 2.5" (6.4 cm)
- Heavy Nut Size:
- 3/4" (1.9 cm)
- Height:
- 1.0000 in
- Material:
- Alloy Steel
- Nominal Opening:
- 1-1/4" (3.2 cm)
- Nut Type:
- U.S. Heavy
- Offset Angle:
- 60°
- Overall Height:
- 1" (2.54 cm)
- Overall Length:
- 16.625" (42.2 cm)
- Overall Width:
- 2.5" (6.4 cm)
- Taper Diameter:
- 1" to 1/4" (2.5 to 0.6 cm)
- Type:
- Spud Wrench
- Weight:
- 1.9800 lbs
- Width:
- 2.5000 in