Square D JDA PowerPacT J-Frame...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,318.76
Square D JDA PowerPacT J-Frame 3-Pole 600VAC I-Line Circuit Breaker

Square D JDA PowerPacT J-Frame 3-Pole 600VAC I-Line Circuit Breaker

(No reviews yet) Write a Review

Model: JDA36200

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,318.76
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Square D JDA PowerPacT J-Frame 3-Pole 600VAC I-Line Circuit Breaker

The Square D JDA PowerPacT J-Frame circuit breaker protects electrical systems from damage caused by overloads and short circuits. This 3-pole, 600VAC family uses an I-Line connection with thermal magnetic trip protection, a front cover rated IP40, and is built for commercial and industrial distribution applications where dependable, code-compliant overcurrent protection is required. This listing covers the JDA breaker family available across a Motor FLA range of 150A to 250A, letting you match the breaker to your specific feeder or motor circuit requirement while sharing the same core ratings and construction across every option.

Key Features

  • Motor FLA Range: Available in 150A, 175A, 200A, and 250A Motor FLA options to match your circuit protection needs.
  • Poles & Voltage: 3-pole configuration rated 600V AC (Ue) operational voltage per IEC 60947-3.
  • Connection Type: I-Line connection on the line side with lugs on the load side for straightforward panelboard integration.
  • Trip Protection: Thermal magnetic trip unit delivers both short-circuit and overload protection.
  • Insulation & Withstand Ratings: 750V rated insulation voltage (Ui) and 8kV rated impulse withstand voltage (Uimp) per IEC 60947-2.
  • Wire Range: Accepts AWG 3/0...350 kcmil aluminum/copper terminals with a tightening torque of 25-25 N.m (95-185 mm²).
  • Mounting: I-Line bracket mounting for compatible I-Line panelboard systems.
  • Adjustment Range: Long time pick-up adjustment range of 0.25...1 x In for tailored overload settings.
  • Enclosure Protection: Front cover degree of protection rated IP40; suitable for isolation per IEC 60947-2.
  • Operating Environment: Rated for operating altitudes up to 5000m with derating, or below 2000m (6561.68 ft) without derating.

Certifications & Compliance

  • UL Listed
  • CSA Certified
  • NOM-003-SCFI-2000
  • NEMA Standards
  • IEC 60947-2 / IEC 60947-3
  • CE Quality Label
  • RoHS Exemption Information Applicable
  • HACR Rated Circuit Breaker Application

Technical Specifications

  • Poles Description: 3P
  • Warranty Period: 18 months
  • Ambient Air Temperature For Operation: -25-70 °C
  • Mercury Free: Yes
  • Sustainable Packaging: No
  • Quality Labels: CE
  • Without Single Use Plastic: Yes

Typical Applications

  • Commercial and Industrial Electrical Distribution Systems
  • I-Line Panelboard and Switchboard Installations
  • Overload and Short-Circuit Protection for Motor and Feeder Circuits
  • Distribution Equipment for New Construction and Retrofit Projects
  • Facilities Requiring HACR-Rated Overcurrent Protection

Why Square D?

Square D JDA PowerPacT J-Frame circuit breakers are manufactured by Schneider Electric and built to IEC 60947-2/60947-3 standards with UL, CSA, and NOM certifications, giving electrical professionals confidence in reliable, code-compliant overcurrent protection across the full 150A-250A Motor FLA range. The thermal magnetic trip design, wide AWG 3/0...350 kcmil terminal range, and I-Line bracket mounting make this breaker family a versatile choice for demanding commercial and industrial distribution systems.

Manufacturer Resources

Product Specs

Product Type:
Circuit Breaker
Series:
PowerPacT J
Voltage Rating:
600VAC
Configuration:
3-Pole
Connection Type:
I-Line
Listing:
UL Listed
Standards:
IEC 60947-2/60947-3
Department:
Electrical
Product Group:
Wiring Devices
Amperage Rating:
150A-250A
Product Subgroup:
Circuit Breakers

Square D JDA36200 – Frequently Asked Questions

1) What amp ratings does the Square D PowerPacT J-Frame JDA36 breaker come in?
The JDA36 3-pole thermal magnetic breaker is offered in four ratings: 150A (JDA36150), 175A (JDA36175), 200A (JDA36200) and 250A (JDA36250). All four share the same I-Line line-side connection and 600V AC rating, so the amp rating is the only thing you pick on the order.
2) Will a PowerPacT J-Frame JDA breaker plug into my existing I-Line panelboard?
It is built for I-Line equipment. The line side uses the I-Line stab connection with an I-Line bracket mounting, so it bolts into a compatible I-Line panelboard or switchboard without separate cable terminations on the line side. The load side lands on lugs. If your gear is not I-Line, this is the wrong connection type.
3) What wire size can I land on the load side lugs of the Square D JDA J-Frame breaker?
The load-side terminals take AWG 3/0 through 350 kcmil, aluminum or copper, which covers the 150A to 250A range this breaker is built in. The lugs are torqued to 25 N.m.
4) Is the trip setting on the PowerPacT J-Frame adjustable, or is it fixed?
The thermal magnetic trip unit has a long-time pick-up adjustment range of 0.25 to 1 x In, so a 250A frame can be dialed down for a smaller load rather than swapping to a lower-rated breaker. Short-circuit and overload protection are both handled by the same trip unit.
5) Can an ABB A2 Series molded case breaker be used in place of a Square D PowerPacT J-Frame breaker?
Not in an I-Line panelboard. The Square D PowerPacT J-Frame breaker uses an I-Line connection on the line side, which is a bolt-on plug-in interface specific to Square D I-Line panelboards and switchboards. The ABB A2N Series is a 3-pole molded case circuit breaker that is UL Listed, but it is a different manufacturer's frame and does not land on I-Line bus. An ABB A2 breaker is a candidate only where the enclosure or panel is built for that frame, such as an individually mounted or ABB-specific assembly.
6) Is an ABB ST200M miniature circuit breaker a substitute for a Square D PowerPacT J-Frame breaker?
No. The ABB ST200M is a miniature circuit breaker built to UL1077, which covers supplementary protectors rather than branch circuit protection. The Square D PowerPacT J-Frame is a 600V, 3-pole molded case breaker with an I-Line connection used for feeder and distribution protection in commercial and industrial panelboards. A UL1077 miniature device is intended for supplementary duty inside equipment, not as a replacement for a J-Frame feeder breaker.
7) Can I use this breaker to protect an HVAC unit with a compressor?
Yes, it carries the HACR rated circuit breaker application, which is what inspectors look for on branch protection for heating, air conditioning and refrigeration equipment with motor-compressor loads. The long-time pick-up is adjustable from 0.25 to 1 x In to suit the equipment nameplate.
8) What certifications does the Square D PowerPacT J-Frame carry for a code inspection?
UL Listed and CSA Certified, built to IEC 60947-2 and IEC 60947-3, with NOM-003-SCFI-2000 for Mexico and a CE quality label. It also meets NEMA standards and is suitable for isolation per IEC 60947-2.
9) Can this breaker be installed in an unheated mechanical room or a hot rooftop enclosure?
Operating ambient range is -25 to 70 degrees C, which covers unconditioned mechanical spaces and rooftop gear. Altitude is fine below 2000m (6561.68 ft) with no derating; above that up to 5000m you derate. The front cover is IP40, so the breaker itself relies on the enclosure for weather protection.
10) What is the closest thermal magnetic alternative to the Square D PowerPacT J-Frame breaker?
On trip technology alone, the ABB E150 Series is a 3-pole thermal magnetic circuit breaker, the same trip type the Square D PowerPacT J-Frame uses. The difference is the mounting and connection: the PowerPacT J-Frame is built with an I-Line connection for Square D I-Line panelboard bus, while the E150 is an ABB frame that mounts in ABB equipment. Choose by what the panel accepts first, then by ampere rating.
11) How does the ABB XT4 kit differ from a Square D PowerPacT J-Frame breaker for a panelboard job?
The ABB XT4 item is a 3-pole molded case circuit breaker kit in ABB's XT4 frame, while the Square D PowerPacT J-Frame is a 3-pole 600VAC breaker with a factory I-Line connection on the line side and lugs on the load side for direct integration into Square D I-Line panelboards. For a contractor working an existing I-Line panel, the J-Frame lands on the bus without adapters; the XT4 belongs to a different mounting system.
12) What insulation and impulse withstand ratings does this breaker have for a switchboard spec?
Rated insulation voltage (Ui) is 750V and rated impulse withstand (Uimp) is 8kV, both per IEC 60947-2. Those are the numbers an engineer checks against the distribution equipment coordination study.
How fast can I get the Square D JDA36200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Square D JDA36200 come with a warranty?
Absolutely. The Square D JDA36200 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Square D JDA36200?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Square D JDA36200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!