You may also like
STA-KON SLEEVE CONN.
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Parallel Splice
- Replacement Product Id New :
- 7TAI029620R0036
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Bronze
Sta-Kon 2C14-12 – Frequently Asked Questions
1) What wire sizes does the Sta-Kon 2C14-12 sleeve connector accept?
The Sta-Kon 2C14-12 parallel splice sleeve is sized for 12-10 AWG conductors. Run it outside that range and you won't get a sound crimp, so for 14 AWG and smaller or 8 AWG and larger you need a different sleeve size.
2) Is the 2C14-12 splice insulated, or do I have to tape or heat-shrink it?
It's a non-insulated sleeve, bare bronze with a metallic finish. The crimped joint has no dielectric covering of its own, so you insulate it yourself with tape, heat-shrink, or by housing the splice inside an enclosure or box.
3) Is this splice UL recognized for inspection purposes?
The 2C14-12 is covered under UL file E9809, which is the reference an inspector or spec reviewer will want on a non-insulated splice.
4) What's the difference between a parallel splice sleeve like this and a butt splice?
A parallel splice takes both conductors in from the same end, side by side, and you crimp the sleeve over them. A butt splice takes one wire in each end to extend a run in a straight line. Use the 2C14-12 when you are tapping or joining two 12-10 AWG wires lying alongside each other, not when you need to lengthen a single conductor end to end.
5) I have an older part number on my drawing. What is the current Sta-Kon number for this sleeve?
Order it as Sta-Kon 2C14-12. The current manufacturer product ID on record for it is 7TAI029620R0036, which is useful if your purchasing system or an older spec sheet lists that number instead.
6) Does this splice need a special crimp tool, or is it supplied with anything?
The 2C14-12 is the bare sleeve only. It's a crimp-type connector, so you supply the crimping tool and die appropriate for a 12-10 AWG non-insulated barrel, plus whatever insulation you intend to put over the finished joint.
7) Will a bronze splice sleeve work on copper building wire?
Yes. The 2C14-12 sleeve is bronze, a copper-alloy body intended for copper conductors in the 12-10 AWG range. It is not an aluminum or AL/CU dual-rated connector, so don't use it on aluminum conductors.
8) Is this connector made in the USA for a Buy American job?
Country of origin on the Sta-Kon 2C14-12 sleeve connector is the United States, which is the data point procurement teams on federally funded work usually need documented.
How fast can I get the Sta-Kon 2C14-12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon 2C14-12 come with a warranty?
Absolutely. The Sta-Kon 2C14-12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon 2C14-12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon 2C14-12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.