You may also like
STAKON DIST PACK NON-INSU
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Wire Size:
- 8 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
Sta-Kon D8-10MM-1 – Frequently Asked Questions
1) What wire size does the Sta-Kon D8-10MM-1 ring terminal accept?
It's built for 8 AWG conductor. If you're terminating anything lighter or heavier than 8 AWG, this is the wrong terminal, since a crimp barrel only forms a sound connection on the gauge it was sized for.
2) Is the Sta-Kon D8-10MM-1 insulated or non-insulated?
Non-insulated. The D8-10MM-1 is a bare ring (closed barrel) terminal, so the crimp and the conductor are exposed once installed. In panel and ground-bus work that's usually fine, but if you need the barrel covered you'll want to add adhesive-lined or standard heat shrink over the crimp, or specify an insulated ring terminal instead.
3) Ring terminal or fork (spade) terminal for an 8 AWG connection to a stud?
Use the ring. The D8-10MM-1 is a closed-ring 8 AWG terminal, so the screw or stud passes through a continuous eye and the lug can't vibrate off a loosened terminal the way a fork tongue can. Fork terminals only earn their keep where you need to slide the conductor out without fully removing the screw, which is rarely worth it on a heavy 8 AWG feeder or ground run.
4) Do I need a special crimper for the Sta-Kon D8-10MM-1?
It's a crimp-on, non-insulated terminal for 8 AWG, so it needs a heavy-duty crimp tool with a non-insulated (bare terminal) die sized for 8 AWG. Standard red/blue/yellow insulated-terminal pliers won't develop the force needed on an 8 AWG barrel, and no solder or hardware is supplied with the terminal, you provide the stud or screw at the connection point.
5) Are Sta-Kon D8-10MM-1 terminals made in the USA?
Yes, country of origin on the D8-10MM-1 is the United States. That matters if you're buying against a Buy American or domestic-preference clause on a government, transit, or institutional job.
6) What exact part number should I order for a Sta-Kon 8 AWG non-insulated ring terminal?
Order Sta-Kon D8-10MM-1. That's the single manufacturer part number for this 8 AWG non-insulated ring terminal, so there are no finish or size options to specify when you place the order.
How fast can I get the Sta-Kon D8-10MM-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon D8-10MM-1 come with a warranty?
Absolutely. The Sta-Kon D8-10MM-1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon D8-10MM-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon D8-10MM-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.