You may also like
Metallics JTSF33 12 x 3/4 in. Flat Head Phillips Tapping Screws - Steel Zinc - Each
Model: MET-JTSF33
12 x 3/4 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty
Additional Notes
Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...
Metallics
$50.41
$0.41
Stanley 55-515 12-3/4 in. Flat Steel Wonder Bar
The Stanley 55-515 12-3/4 in. Flat Steel Wonder Bar is a compact flat pry bar for prying, scraping, lifting and pulling nails. It is forged from high-carbon steel and heat treated for strength, with beveled nail slots on both ends so you can grab nails from either side. Polished beveled edges slide under trim, flooring and other tight-fitting materials, and a powder-coated finish helps protect the bar. It is backed by a Stanley limited lifetime warranty. Its compact size makes it a good everyday bar for trim work, flooring repairs and light demolition, and it fits easily in a tool bag or bucket organizer. Because it is thin and flat, it is also a good choice for opening gaps behind baseboard and casing without damaging the wall, then working the trim free a little at a time along its length.
Key Features
- Beveled Nail Slots: Nail slots on both ends pull nails from either direction.
- Polished Beveled Edges: Thin edges slide into tight gaps.
- Forged, Heat Treated: Forged high-carbon steel, heat treated for durability.
- Powder-Coated Finish: Finish helps protect the bar.
- Limited Lifetime Warranty: Backed by a Stanley limited lifetime warranty.
Technical Specifications
- Brand: Stanley
- Model: 55-515
- UPC: 076174555158
- Product Type: Pry Bar
- Length: 12-3/4 in. (340 mm)
- Material: Forged high-carbon steel, heat treated
- Finish: Powder coated
- Warranty: Limited lifetime
Typical Applications
- Pulling nails
- Removing trim and molding
- Lifting flooring
- Light demolition
- Scraping and prying in tight spaces
Why Stanley?
Stanley's 55-515 packs forged, heat-treated high-carbon steel, nail slots on both ends and polished beveled edges into a 12-3/4 in. bar that fits in a tool bag, and it is backed by a limited lifetime warranty. Use it alongside a hammer for quick nail pulling, or slip it behind trim to start a gap before moving to a larger bar.
Manufacturer Resources
Product Specs
- list_batch:
- STA-20260923
- Department:
- Electrical
- Product Subgroup:
- Hammers & Wrenches
- Product Type:
- Pry Bar
- Product Group:
- Hand Tools
Stanley 55-515 – Frequently Asked Questions
1) Will this flat bar get behind baseboard and casing without tearing up the drywall?
That is what the 55-515 is built for. It is thin and flat with polished beveled edges that slide into tight gaps behind trim, flooring and other close-fitting material, so you can open a gap and work the trim free a little at a time along the length of the bar instead of levering hard in one spot. For heavier tear-out, start the gap with this bar then switch to a larger pry bar.
2) How long is the Stanley 55-515 Wonder Bar, and will it fit in a tool bag or bucket organizer?
The 55-515 Wonder Bar measures 12-3/4 inches (340 mm) overall, which is short enough to ride in a tool bag or bucket organizer rather than needing to be carried loose. That length is the tradeoff: plenty of reach for trim, casing and flooring work, but less leverage than a full-size wrecking bar for heavy demolition.
3) Can I pull nails from either end of the Stanley 55-515 flat bar?
Both ends carry beveled nail slots, so you can grab a nail head from either direction without flipping the work or hunting for the right end. That is handy when you are pulling fasteners along a run of baseboard and cannot always attack from the same side.
4) What is the Stanley 55-515 made of, and will it bend under load?
It is forged from high-carbon steel and heat treated for strength, with a powder-coated finish over it to help protect the bar. Forged and heat-treated construction is what keeps a thin flat bar from taking a permanent set the first time you lean on it, though any 12-3/4 inch bar this thin is meant for trim, flooring and light demolition rather than structural demo.
5) Is the Stanley Wonder Bar a nail puller, a pry bar, or a scraper?
All three, within the limits of its size. The 55-515 is a flat pry bar used for prying, scraping, lifting and pulling nails, with typical work being trim and molding removal, lifting flooring, light demolition and scraping in tight spaces. If your job is pulling large spikes or breaking apart framing, a heavier wrecking or ripping bar is the right tool and this one is the finish-work companion to it.
6) What is the exact part number to order for the Stanley 12-3/4 inch flat Wonder Bar?
Order Stanley model 55-515. That is the single model on the 12-3/4 inch flat steel Wonder Bar, so there is no size, finish or handing choice to specify.
7) Is the Stanley 55-515 a reasonable bar to standardize across maintenance techs' bags?
It works well as a standard-issue bar for a maintenance or turnover crew: one model number, 12-3/4 inches so it fits every tech's bag, forged and heat-treated steel, and nail slots on both ends so nobody has to think about orientation. Typical property work it covers is trim and molding removal, lifting flooring, pulling nails and light demolition. Pair it with a hammer for quick nail pulling and keep a larger bar on the truck for anything heavier.
How fast can I get the Stanley 55-515 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Stanley 55-515 come with a warranty?
Absolutely. The Stanley 55-515 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Stanley 55-515?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Stanley 55-515 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.